Passive Components
Description
?
HDMI Signal Extender all to HDMI with HDBaset 100m Cat6 Extender
?
Introduction :
# # The HDMI Fiber Optical Extender is a tool which can extend your HDMI .
# signal over 3300feet / 1000meters to a compatible display .?
# works with any HDMI source and supports resolutions up to 4K Ultra HD .
# It also supports Transfer Bidirectional Infrared control signal and RS232 .
# control signal . So you can control the Source from the Sink side which is .
# 3300feet / 1000meters outside , also you can control the Sink from the .
# Source side which is 3300feet / 1000meters outside using the HDMI .
# Extender . The Automatic Virtual EDID feature allows automatic copying .
# of the Extended Display Identi?ication Data ( EDID ) to the sender unit for .
# continuous availability to the source .
Features :
?
11 . Supports HDMI1 . 4 , HDCP1 . 3 and compatibility DVI .
12 . Supports video resolutions up to 4K x 2K @ 30Hz , 1080p @ 120Hz , and 1080p 3D .
13 . Supports long distance transmission up to 3300feet / 1000meters over .
14 . single - mode iber cable and up to 1000 feet / 300 meters over multimode .
15 . iber cable ( 50 / 125μm / OM3 ) .
16 . Supports HD audio formats : LPCM2 / 5 . 1 / 7 . 1 CH , Dolby Digital , DTS , Dolby .
17 . TrueHD , DTS - HD Master Audio and more .
18 . Transfer Bidirectional Infrared control signal together with the HDMI signal .
19 . Transfer Bidirectional RS232 control signal together with the HDMI signal .
20 . Supports smart EDID management .
21 . Locking power supplies .
?
Package
?
- - - -
# HDMI Fiber Optical Extender Transmitter | # 1PCS |
# HDMI Fiber Optical Extender Receiver | # 1PCS |
# Fiber module TX | # 1PCS |
# Fiber module RX | # 1PCS |
# Wideband IR Tx | # 2PCS |
# Wideband IR Rx | # 2PCS |
# 5V / 1A DC power adaptor | # 2PCS |
# Operation Manual | # 1PCS |
# Phoenix male jack | # 2PCS |
# Mounting ears | # 4PCS |
- - - -
?
Specifications :
?
- - - -
# Maximum Pixel Clock | # 300 MHz |
# Supports video resolutions up to | # 4K * 2K @ 30Hz |
# Input Ports | # 1xHDMI , 1xIR in , 1xRS232 |
# Output Ports | # 1xIR out ,1xOptical |
# Input Ports | # 1xIR in ,1xOptical |
# Output Ports | # 1x HDMI ,1xIR out , 1xRS232 |
# Power Supply | # DC 5V 1A |
# ESD Protection | # ± 8kV ( air - gap discharge ) |
# Human Body Model | # ± 4kV ( contact discharge ) |
# Weight | # 210g / TX , 210g / RX |
# Operating Temperature | # 0°C ~ 40°C / 32°F ~ 104°F |
# Storage Temperature | # : -20°C ~ 60°C / -4°F ~ 140°F |
# Relative Humidity | # 20 ~ 90% RH ( Non - condensing ) |
# Power Consumption ( Max ) | # 2.2W / TX , 2W/RX |
- - - -
?
Unit Layout & Description
?
Transmitter Front and Rear Panel
?
- - - -
# DC 5V | # Plug the 5V DC power supply into the unit |
# Power | # illuminates when power has been supplied to the unit |
# HDMI In | # This slot is where you connect the HDMI source |
# Rs232 TX / RX | # Connect to a PC or Laptop with 3 - pin Relay cable for the transmission of RS - 232 commands |
# Optical link | # illuminates when the Transmitter and Receiver through optical fiber cable connection good |
# HDMI in | # illuminates when HDMI source has been supplied to the unit |
# Optical out | # Connect Receiver with a single-mode fiber cable or multimode fiber cable |
# IR TX | # Connect with Wideband IR Tx |
# IR RX | # Connect with Wideband IR Rx |
- - - -
?
Receiver Front and Rear Panel
?
- - - -
# DC 5V | # Plug the 5V DC power supply into the unit |
# Power | # illuminates when power has been supplied to the unit |
# HDMI Out | # This slot is where you connect to a HDMI equipped TV / monitor |
# Rs232 TX / RX | # Connect to a PC or Laptop with 3 - pin Relay cable for the transmission of RS - 232 commands |
# Optical link | # illuminates when the Transmitter and Receiver through optical fiber cable connection good |
# HDMI Out | # illuminates when HDMI display device has been connected to the unit |
# Optical In | # Connect Transmitter with a single - mode ?iber cable or multimode fiber cable |
# IR TX | # Connect with Wideband IR Tx |
# IR RX | # Connect with Wideband IR Rx |
- - - -
?
IR Cable Pin Assignments
?
?
Connection Diagram
?
Bidirectional Infrared control Application Example
?
Bidirectional RS232 control Application Example
Application Example
?
Thank you for purchasing this product . For optimum performance and safety , please read the instruction carefully before connecting , operating or adjusting this product. Please keep the manual for future reference .
Wish you have a beautiful life and lucky everyday .
?
If you have any problem or inquiry just contact us at any time ( [Jessie @ dodonet . com . cn] or Call at :86-137 1442 9421 ) ,Your best supplier SZ DODONET TECHNOLOGY CO. , LTD . Will give the best services , quality and prices for you .
?
?
Read More
SZ DODONET TECHNOLOGY CO.,LTD
VGA Video Converter,HDMI Switch Box,HDMI Signal Splitter
Address: 3rd floor ,Xinbaoyi electronic park ,Houting the third tech park ,Shajing town,Bao'an district ,Shenzhen ,China,
Shenzhen, Guangdong
China, 518000
Tel: 86-137-14429421
Fax: 86-137-14429421
