Electronic Signs

1. Home
2. Products
3. Electronic & Electrical
4. Electronic Signs

Share us

Flaw Detection Industrial Radiography Equipment , X Ray Ndt Equipment AC Input Power

XXQ-2005

Send Inquiry

Description

XXQ-2005 Portable X ray detector with Industrial flaw detection applications Penetration 30mm ? Parameters
?

- - - -
Model | XXQ-2005 |
Tube | Glass |
Output voltage | 100-200 KV |
Focus size1.5 | 1.5×1.5 mm |
Radiation angle | 40° |
Penetration | FE 30 mm |
Generator size | 280×280×640 mm |
Generator weight | 22kg |
Controller size | 380×380×190 mm |
Controller weight | 12 kg |
Input power | AC 185-245V @50~60Hz |
Cooling | Air |
- - - -

?
Introduction ? ? 1. It can still work by applying special design what can avoid the interference by power grid change. 2. Apply the isolation technology of low voltage and high voltage to ensure the controller working stablely. 3. Posses the reliable “time-delayed” function, suitable to operate in the open field. 4. It has functions of troubleshooting automatically and pressure indication to guarantee the stability of working. Distinguishing feature ? # Adopting micro-computer control and modular structure,with strong anti-interference ability and high automaticity and reliable performance.
# Parameter setting,working process and trouble indication will be indicated on the LED lamp.
# Independent ageing key is designed for age the machine conveniently.
# Radiating time to cooling time is 1:1.
# The controller can notice the type of x-ray generator automatically.
# The water and dust proof color panel and digital sound keyboard are introduced that exposure parameters are promptly and accurately selected.
# Ensure safety useing the instrument,it is installed with overvoltage,undervoltage,overcurrent,undercurrent and overtemperature protection device.
# Adopting the wider range of kv value, and solve the difficulty problem of short radiographic range.
# Exposure delay function——the delay time can be set less than 10 minutes to keep the operator safe from working place.
# Match with various generator and function reliably.
# With the outlet of ray warning lamp and wire connecting terminal of door-machine interlock.(Door-machine interlock——when the lead door open ,the instrument cut off the high voltage automatically to protect the operator)

?


? ? Composition and Application
?
x ray flaw detector consists of three parts,controller, generator and connection cable . X Ray flaw detector plays important parts in carrying on nondestructive examination for nonmetallic, light metal, casting, various alloys and pressure vessels etc, mainly detecting weld defects ,such as crack, blowhole, entrapped slag, incomplete fusion ,blowhole,bubble etc ,also using for shipbuilding ,airplane and national defense etc industry fiel. ? Matters needing attention
?
(1) ?The temperature of the container X ray generator, with the use of time may be rising, handling equipment on cameras, please wear gloves handling, and must be handled with care. (2) ?In handling X mobile X-ray machine, if severe vibration or shock, can make X ray tube fragmentation or filament deformation or high voltage coil move, resulting in equipment is not working properly or damaged. (3) ?The X ray generator in the car, forklift, must stand (fan end in), while below the mat cushion, if must be sideways when carrying rings at both ends to pad the damping material to prevent shock. (4) ?Using the temperature controller in the -10 to +40 DEG C, rain prohibited, to avoid danger or damage the instrument to prevent joint components caused by frost in winter, poor insulation. (5) ?Because of the system work, to produce a high voltage pulse controller, induction to the housing, to connect the ground when necessary. When erecting generator in welding plate and the workpiece, the generator with iron and workpiece distance, avoid the welding current through the generator, the low voltage cable into the control box will damage to the machine.
?

Read More