Industrial Supplies Stocks
Description
Automatic PVC fitting injection molding machine 430Ton
?
Detailed Product Description
? ? Based on the design of our general-purpose machine, we developed the PVC injection molding machine that ensures the strict requirement of PVC products
?
# # specialized PVC plasticization components, hard chrome plated screw, nozzle(with bigger nozzle hole),and nozzle flange are adopt to ensure the quality of PVC production and extend the life of the mechanical parts. All the components are highly anti-corrosive
# widened safety door design, equipped with double core pulling device(each one has two inputs and two outputs)
# barrel are forced cooling by compressed air through air channels in individual zones with independent control or screw oil cooling connected to oil temperature controller ,to avoid thermal degradation of PVC powder in barrel
# enlarged hydraulic motor, to fit the high torque requirement for PVC plasticization
# oil cooling and water cooling system in screw barrel for large-sized machine
# hardened chromed nozzle, large nozzle holt that ensure products flow and volume
# oversized hydraulic motor matched to meet the large torque requirements neededfor plasticizing PVC material
?
COMPONENT
- - - -
COMPONENT | BRAND&ORIGINAL | ? |
hydraulic?system | Servo |
hydraulic?motor | INTERMOT-ITALY-CHINA | ● |
servo?motor?control?system | HUICHUAN/PHASE-CHINA | ● |
hydraulic?pump | fixed?Pump | VICKERS?OR?YUKEN | / |
gear?pump | SUMITOMO-JAPAN | ● |
hydraulic?direction?valve | NORTHMAN-TAIWAN | ● |
propotional?flow?control?valve&propotiona l?pressure?control?valve | HNC-TAIWAN?FOR?BIG?MACHINE, SMALL?MACHINE?USE?DONGFENG-CHINA | / |
mould?adjust?hydraulic?motor | INTERMOT-CHINA? | ● |
hydraulic?safety?valve | NORTHMAN-TAIWAN | ?● |
electric?system | ? |
computer/controller | TECHMATION-TAIWAN | ● |
relay | SCHNEIDER-GERMANY | ● |
main?switch | LS-KOREA | ● |
linear?transducer | GEFRAN-ITALY | ● |
limited?switch | PANASONIC-JAPAN | ● |
breaker | CHENTAI-CHINA | ?● |
electric?motor | ZHONGDA-CHINA | / |
others | ? |
?High?pressure?hydraulic?pipe | GOODYEAR-USA | ● |
seals | VALQUA-JAPAN | ● |
pressure?meter | Tecsis-USA | ● |
automatic?lubrication? | SL-CHINA | ● |
screw? | JINGXING-CHINA?38CrMoAlA | ● |
- - - -
?
?
SPECIFICATION?
?
- - - -
?SPECIFICATION? | M430 |
ITEM | A | B | C | D |
??INJECTION??UNIT | ? |
?????????SCREW??DIAMETER | mm | 65 | 70 | 75 | 80 |
??????SCREW??L/D??RATIO | L/D | 24 | 22 | 20 | 19.2 |
???SHOT??VOLUME(THEORETICAL) | ? | 1261 | 1462 | 1679 | 1910 |
??????????INJECTION??WEIGHT(PS) | g | 1160 | 1345 | 1544 | 1757 |
??????????INJECTION??PRESSURE | Mpa | 194 | 168 | 146 | 128 |
??????????INJECTION??RATE | g/sec | 206 | 238 | 274 | 312 |
?????????SCREW??SPEED | rpm | 150 |
CLAMPING?UNIT | ? |
?????????????CLAMP??TONNAGE | KN | 4300 |
??????????TOGGLE??STROKE | mm | 700 |
??????????MIN.MOLD??HEIGHT | mm | 280 |
??????????MAX.MOLD??HEIGHT | mm | 780 |
??????SPACE??BETWEEN??TIE??BARS | mm | 750X710 |
?????????????EJECTOR??TONNAGE | KN | 100 |
??????????EJECTOR??STROKE | mm | 200 |
?????EJECTOR??NUMBER | PC | 13 |
OTHERS | ? |
??MAX.PUMP??PRESSURE? | Mpa | 16 |
?????????HEATER??POWER | KW | 23.5 |
???PUMP?MOTOR??POWER | KW | 37 |
?????????OIL??TANK?CUBAGE | L | 630 |
?????????MACHINE??DIMENSION(LxWxH) | M | 7.5X1.65X2.35 |
??????????MACHINE??WEIGHT | T | 13.2 |
- - - -
?
?
Selling?points
?
1.?More?fast?cycle:valve?panel?design?in?bigger?hole?with?bigger?oil?pipe.Oil?go?though?the?valve?more?fast
?flow?and?the?Machine?action?more?goes?more?faster?in?mould?open?and?ejector?process.?
?
2.?Material?charging?more?faster:Adopt?proportional?control?for?backpressure,can?be?set?in?the?controller?, more?smart?and?easy?operation.when?material?charging,you?can?set?0?in?the?backpressure,so?the?
charging?will?be?more?efficient?and?faster.make?sure?every?shot?to?be?more?accurate?than?manual?control
?type.
?
3. Adopt?Techmation?newest?verison?controller?which?is?more?fast?response?,more?output?and?input?can?
be?use?for?connection?the?robot?in?future.
?
4 Hydraulic?safty?protection?installed?in?both?front?and?rear?operation?door.when?any?door?is?open,
the?hydraulic?system?will?be?shut?down?to?provide?more?safty?protect?for?the?operators.?
?
5 Adopt?38CrmoAla?Material?for?key?in?toogle?part.more?endurable?in?using.other?supplier?may?use?
40CR?or?45#?Steel
?
6 Double?oil?tank?design:because?short?the?distance?for?the?oil?return?line?,the?hydraulic?system?
response?is?getting?more?quicker.?In?the?meantime,this?design?will?reduce?the?oil?temperaure?,protect?the?oil?seal.
?
7. Using?bridge?design?for?the?injection?unit,avoid?material?leakage?if?the?injection?unit?is?not?stay?in?the
?same?level.
?
8. Adopt?double?injection?cylinder?,more?faster?and?powerful.avoid?any?injection?less?or?injection?not?in?
the?center?by?single?injection?cylinder
?
9. Screw?barrel?material?using?top?3?supplier?in?China
?
10. Offer?2?hydraulic?core?pull?in?the?valve?panel?for?future?installation?
?
11. Products?collection?hopper?can?be?dis-assembled?and?install?convenyor?in?future
?
12. Install?the?linear?transducer?for?clamping?near?the?crossing,not?easy?to?get?damaged?by?clearning?or?
maintaiance.
?
13. Mould?thickness?fully-automatic?adjustment?by?sensor,wheel?and?moto,more?accurate
?
14. Install?screw?rotation?speed?sensor?,can?see?the?real?material?charging?status?in?the?controller.
Read More
Previous
PA nylon Plastic Blow Molding Machine...
VAINO INTERNATIONAL LIMITED
HDPE Blow Molding Machine,Extrusion Blow Molding Machine,Automatic Blow Molding Machine
Address: Room1315,B# Ningbo Chamber Of Commerce Building,No.588 Tiantong South Road,Yinzhou District,Ningbo,China,
Ningbo, Zhejiang
China, 315000
Tel: 86-574-88054805
Fax: 86-574-88054565
