Others
Description
Pneumatic diaphragm intelligent ?angle single-seat control valve
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
YSIQ(D)60 Series of Intelligent Angle Control Valve uses modular design and impact structure. The varieties combination of the trim components make it applicable for high pressure head, high viscosity paste or containing granular fluid conditions, as well as sites like serious being flashed, cavitated and pipe direction change needed.
?
ZM10 series multi-springs pneumatic reinforce actuator, makes the valve realize the conversion of normal close and normal open on site easily, the spring can be effectively protected from the corrosion to prolong the service life of actuator and convenient for customers operation. The actuator and the intelligent valve positioner are connected pipeless to strengthen the antisemitic performance,stability and precision adjustment, to meet to exactly control of the working conditions o:p>
?
Working principle:
??? The equipped smart positioner will convert to valve required settings when receive normal signal of electricity or signal of computer. Then the pneumatic actuator linear displacement will change to angular displacement by valve special connections, and tested by position transducer then feedback to microprocessor.
?
??? The microprocessor will compare the actual valve feedback with original settings and tested if there is any deviation. It will output pulse width modulation command(PWM) to piezoelectric valve according to the the size and direction of deviation. The piezoelectric valve will regulate the input or exhaust gas under the control command.
?
Main Parts Materials? ???????????????????????????????????????????????????????????????Table 1
- - - -
Item | Part Name | Material |
1 | Body | WCB | WC6 | CF8 | CF8M |
2 | Seat | 304,316/Partial Stellite | 316/Partial Stellite |
3 | Plug | Metal Sealing | 304,316/Partial Stellite | 316/Partial Stellite |
Soft Sealing | 304,316+Reinforced Teflon | 316+Reinforced Teflon |
4 | Cage | 304,316 | 316 |
5 | Guide Sleeve | 304,316 | 316 |
6 | Stem | 304,316 | 316 |
7 | Bonnet | WCB | WC6 | CF8 | CF8M |
- - - -
?
*Above is the common materials,the specific grades take the contract as a standard.
?
Specification&Technical Parameter ??????????????????????????????????????????????????Table 2?? ???????????????????????
- - - -
?????? Type | Top Guide Single Seat Angle |
Nominal Diameter | DN20～DN400(3/4”～16”) |
Nominal Pressure | PN16,25,40,64,100(150lb,300lb,600lb) |
Flow Characteristic | Equal Percentage, Linear |
? Rangeability | 50﹕1 |
Bonnet Form | Standard Type:Cast Steel :-20～250℃?? Stainless Steel:-40～250℃ |
Fin-Extension Type:Cast Steel:-29～425℃?? Stainless Steel:-40～450℃ |
Low-Temp. Type:Cast Stainless Steel:-60～-100℃,-100～-200℃,-200～-250℃ |
Seat Leakage | ANSI Ⅳ,V,Ⅵ(Soft Sealing) |
- - - -
Main Performance Index ?????????????????????????????????????????????????????????????Table 3
- - - -
No. | Item | Standard Type | Fin-Extension Type, Low-Temp. Type |
1 | Basic Error＜(%) | ±1 | ±2.5 |
2 | Hysteresis＜(%) | 1 | 2.5 |
3 | Dead Band＜(%) | 0.4 | 1 |
4 | Start &End Deviation＜(%) | ±1 | ±2.5 |
5 | Rated Travel Deviation＜(%) | +2.5 | +2.5 |
- - - -
Note: Performance index of this production is higher than GB/T4213-2008.
Flow Characteristic ??????????????????????????????????????????????????????????????????Table 4
- - - -
Seat Diameter DN(mm) | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 |
Rated Kv | Linear | 17.6 | 27.5 | 44 | 69 | 110 | 176 | 275 | 440 | 690 | 990 | 1430 | 1980 | 2750 |
EQ% | 16 | 25 | 40 | 63 | 100 | 160 | 250 | 400 | 630 | 900 | 1300 | 1800 | 2500 |
- - - -
?
Small Flow Valve? ????????????????????????????????????????????????????????????????????Table 5
- - - -
Seat Diameter DN(mm) | 4 | 5 | 6 | 7 | 8 | 10 | 12 | 15 | 20 | 25 |
Rated Kv | Linear | 0.02 | 0.05 | 0.08 | 0.12 | 0.2 | 0.32 | 0.5 | 0.8 | 1.6 | 2.5 | 4 | 6.9 | 11 |
? | EQ% | - | - | - | - | - | - | - | - | 1.2 | 2.0 | 3.2 | 6.3 | 10 |
- - - -
Read More
Zhejiang yongsheng technology co.,ltd.
Automatic Control Valve,Pipeline Ball Valve,Metal Seated Ball Valve
Address: Lushan Industrial Park,Fuyang,Hangzhou City,Zhejiang Province,China,
Hangzhou, Zhejiang
China, 310000
Tel: 86-571-63168258
Fax: 86-571-63160567
