Coatings
Description
BOYET Series
Product Name/Model：F400-1K Primer Surfacer
Characteristic: Fast drying one-component 1K Primer Surfacer with strong filling power, easy sanded.
Substrates Dried and sanded existing finishes and putty.
Surface?Cleaning Wash by warm soap, remove wax, silicon and other contaminations with
degreaser, sanding with P800-P1000, wash with clean water then keep dry;
again with degreaser.
Mixing?Ratio F400-1K primer surfacer ? Thinner
1 1
＜15℃? F400 1K primer surfacer? BYTX-1 Fast Thinner
15-30℃ F400 1K primer surfacer? BYTX-2 Standard Thinner
＞30℃ F400 1K primer surfacer? BYTX-3 Slow Thinner
Spray?Viscosity 14-16s to drop off, in 4# viscosity cup at 25°C,
Spray Gun?Set Up Gravity Feed: 1.2-1.5mm 4-5kg/cm 2
Suction Feed: 1.4-1.6mm 4-5kg/cm 2
Spray?Technology Coats&Thickness: 2-3 coats, total 20-30um.
Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on
temperature and paint film.
Drying Time Air-drying time 30 minutes, at 20°C.
Shelf Life 2 years in original sealed can, cool and dry place at 20℃.
Package 3.75L×4
Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.
3. Not recommended to apply over large area.
4. Not recommended for direct application over substrate of bare metal, stainless steel, aluminium,zinc, steel and wood.
Read More
Guangzhou Zhenroumei Chemical Coatings Limited
auto paints
Address: No. 16, industrial Avenue Shihai, Conghua City,
Conghua, Guangdong
China, 510970
Tel: +862087833698
Fax: 2087833698
