Textile Waste

1. Home
2. Products
3. Textiles & Leather Products
4. Textile Waste

Share us

Three Color Two Pump Water Jet loom weaving machine , 190cm looms machine manufacturing?

SD822

Send Inquiry

Description

Trouble-Free SD822 190cm Three Color Two Pump Water Jet Loom Machine Supplier

DESCRIPTION

?

- - - -
Model | SD822 |
Loom Width | 190cm / 75 inch |
Reed Width / Actual Weave Width | 40 ~ 70 inch 110 ~ 180cm |
Speed | 500 ~ 570 rpm |
Weft Picks | ?5~ 50 picks / cm |
Color | ?3 color |
- - - -

And Here Is About The Main Configurations Of This Loom

- - - -
SPECIFICATION | SUPPLIERS AND DETAILS |
MATERIAL GRADE | 220 Grade Steel |
WIRE HEALD | 12000PCS/SET FOR DOBBY |
ONE WAY VALVE | TAEBEAK KOREA |
PLUNGER KIT | MDH KOREA |
NOZZLE ASSY | MDH KOREA |
PUMP SPRING | AWA JAPAN |
BRASS PARTS | JL |
PUMP | JL |
FEEDER | SANHE SHJ-P |
TAKE-UP AND LET-OFF | MECHANICAL / ELECTRIC |
VOLTAGE | ACCORDING TO LOCAL STANDARD |
MAIN MOTOR | Redflag |
BEARINGS USED WITH MACHINE | JAPAN |
WARP BEAM | INCLUDED |
- - - -

?

APPLICATION

You Can Freely Use Following Yarns (Included But Not Limited) On Our Water Jet Loom According To Your Requirement .

- - - -
1 | Fdy |
2 | Dty |
3 | Aty |
4 | Roto |
5 | Cationic |
6 | Spun |
7 | Spandex |
8 | Micro |
9 | High Stretch Yarn |
10 | Nylon |
11 | Viscose |
12 | Metal Filament |
13 | Mono-Filament |
- - - -

And Following Polyester Fabric (Included But Not Limited) Is Easily Woven By Our Loom Machine .

- - - -
1 | Polyester Satin |
2 | Polyester Check |
3 | Taffeta |
4 | Taslon Fabric |
5 | Pongee Fabric |
6 | Polyester Shirting Fabrics |
7 | Crepe |
8 | N/P Taffeta |
9 | Saree Fabric |
10 | Taslan |
11 | Micro Peach |
- - - -

THE MAIN ADVANTAGES OF DRDE WATER JET LOOM MACHINE

1. 3-Color Weaving , You Can Use Dyed Yarns And Make Read-made Fabrcs For Shiring etc

2. Wide Application , You Can Use Very Different Types Of Weft , To Design Different Qualities .



3.?This Picture Is Showing Us The Double Pump And Three Nozzle System For Water Jet Loom?Machines . With This System , You Can Actually Weave Check Fabric , Or Polyester Shirting Fabric Etc . Usually, When It Comes To Check Fabric , Different Types Of Denier Yarn Or Different Color Yarns Will Be Used , Common Design Is Unable To Weave Properly , So Here , Two Pumps Are Applied With Our Water Jet Loom . Each Pump Will Be In Charge Of Two Weft Yarns , And For Each Weft , One Unique Change Valve Will Change Water Supply For One Kind Of Weft . By Doing This Way , Each Weft Yarn Is Working Independently , Therefore Better Weaving Quality And Efficiency Is Guaranteed .

?

4.?This Is The Main Structure Of Our Sd822 Series Water Jet Loom Machine?. It Is Made Of Two Pieces Of Heavy-Duty Frame Box , 1 Piece Of 5-Angle Rear-Top Pipe Support , 2 Pieces Of Tri-Angle Pipe Support At The Bottom . The Casting Grade Is #220 For The Frame Box , Long-Lasting Grade And Anti-Deformation And Anti-Vibration. With Some Cheap Quality Looms , Where The Main Structure Is Weak And Poor Material Used, The Loom Machine Structure Will Deform Due To Moisture , Heat And Vibration . When This Deformation Happened , The Life Of Water Jet Weaving Machines Comes To An End . So If You Want A Long Lasting Water Jet Loom Machines , The Main Structure Must Be Strong And Rigid . Like Our Loom .



5.?This Shows The Very Instant When The Weft Is Carried By Jet Water Into The “Opening” Of Two Layers Of Warp Yarns. A Well Designed Weft Insertion System (Pump + Pump Spring + One-Way Valve + Plunger Kit + Nozzle)Of One Set Water Jet Loom?Machine Is The Key For Successful Weaving . The Good System Will Not Break The Weft Yarn As Well As The Warp, And In The Meantime With Less Water Waste . Here With We Drde Water Jet Looms , We Have Designed More 40 Types Of Weft Insertion System And Have Rich Experience To Set The System Properly According To Different Quality . Worry-Free To Go With Us .



6.?All The Copper Parts Are By Jilong Make . Hard-Worn.



7.?Here In This Picture Displays The Crank Shaft Used In The Main Gearbox Of Water Jet Loom Machine?. The Continuous Rotation Of It Determines The Shedding Open And Close . It Is Made Of Top Grade Bearing Steel, Hard-Worn And Anti-Heat . 5 Years Warranty For This Part.



Always Ready To Serve You ....

Regards

Robert

?

?

?

Read More