Textile Machinery & Parts

1. Home
2. Products
3. Textiles & Leather Products
4. Textile Machinery & Parts

Share us

530 - 570 RPM Speed 210cm Water Jet Loom Machine Three Color Dobby Weaving

SD408

Send Inquiry

Description

DESCRIPTION

Here You Sir Are Seeing Our?Heavy-Duty SD408 210cm 83 Inch Three Color Dobby Weaving Water Jet Loom Machine For Sale .

Its Main Features Are As Following .

- - - -
?Model | ?Heavy-duty SD408 |
?Loom Width | ?210cm ?83 inch |
?Reed Width / Actual Weave Width | ?120 ~ 200cm 47 ~ 78 inch |
?Speed | ?530 ~ 570 rpm |
?Weft Picks | ?5 ~ 60 picks / cm |
?Take-up / Let-off | ?Electric |
- - - -

?

?

APPLICATION

You Can Freely Use Following Yarns (Included But Not Limited) On Our Water Jet Loom According To Your Requirement .

- - - -
1 | Fdy |
2 | Dty |
3 | Aty |
4 | Roto |
5 | Cationic |
6 | Spun |
7 | Spandex |
8 | Micro |
9 | High Stretch Yarn |
10 | Nylon |
11 | Viscose |
12 | Metal Filament |
13 | Mono-Filament |
- - - -

And Following Polyester Fabric (Included But Not Limited) Is Easily Woven By Our Loom Machine .

- - - -
1 | Polyester Satin Fabric |
2 | Chiffon Polyester Fabric |
3 | 100% polyester fabric |
4 | Taslon Fabric |
5 | Pongee Fabric |
6 | Peach Skin |
7 | Crepe |
8 | N/P Taffeta |
9 | Saree Fabric |
10 | Polyeste Oxford |
11 | Micro Peach |
- - - -

?

THE MAIN ADVANTAGES OF DRDE WATER JET LOOM MACHINE

?

1.?Main Frames Of Our Water Jet Loom Machine Are Made Of 250 Degree Steel, High Rigidity; And Two Pieces Of Frame For One Set Loom Will Be Processed At The Same Time By Imported Cnc Machine To Ensure Perfect Horizontal Level Match And Precise Tolerance. Main Frames Are The Base Body To Mount And Hold All Other Parts , Without A Strong And Steady Body , It Will Be Like A Palace Built On Sand , Failure Is Doomed .



2.?With Reference To The Rear-Top Support , Here In The Above Picture Shown Is What We Call It “Middle Support” . It Is Connected And Mounted The Front-Top Support And Rear-Top , To Conduct The Vibration From Top To The Ground. Here With DRDE Water Jet Loom Machine , It Is Strong One As It Can Be Easily Seen.



3.?This Shows The Very Instant When The Weft Is Carried By Jet Water Into The “Opening” Of Two Layers Of Warp Yarns. A Well Designed Weft Insertion System (Pump + Pump Spring + One-Way Valve + Plunger Kit + Nozzle)Of One Set Water Jet Loom?Machine Is The Key For Successful Weaving . The Good System Will Not Break The Weft Yarn As Well As The Warp, And In The Meantime With Less Water Waste . Here With We Drde Water Jet Looms , We Have Designed More 40 Types Of Weft Insertion System And Have Rich Experience To Set The System Properly According To Different Quality . Worry-Free To Go With Us .



4.?Electric Let-Off System . Traditionally, With Water Jet Loom Machine?, The Feeding Of Warp Yarn Is Controlled By Mechanical Let-Off System . For Some Quality , The Usual Mechanical System Is Unable To Detect The Subtle Tension Variation , Thus Sometimes Stop Mark Will Happen To The Fabric . While With Electric Let-Off System By Cpu Control , Even Very Subtle Tension Fluctuation Will Be Detested And Rectified Accordingly To Prevent Stop Mark .



5.?This Is Locking Shaft Of Water Jet Loom?Machines . With Our Company , The Locking Shaft Is Polished By Sand Blasting Machine ; After This Treatment , The Surface Of The Shaft Is More Balanced And Clean , Thus The Base Paint Layer Will Be More Tightly Attached To It . Better Anti-Rust Effect Is Guaranteed . And What’S More , The Sand Blasting Will Make The Shaft More Rigid , Unable To Break.



6. 5-Angle Front-up Support Is Applied To Ensure Stable Weaving Of High GSM fabrics .

?

Read More