Plastic Machinery

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Plastic Machinery

Share us

CCGX DCGX Tungsten Carbide Cutting Tools Indexable Inserts for Aluminium Machining

AIA-1

Send Inquiry

Description

CCGX DCGX ?Tungsten Carbide Indexable Inserts for Aluminium Machining YG6 YG6X

?

Brief Introduction:

?

The machinability of aluminum differs depending on alloying elements, heat treatments and manufacturing processes (forged, cast, etc.). Tungsten Carbide inserts with a positive basic?shape and sharp edges should always be used.?Carbide Inserts Ground & Polished specially for Turning Aluminium Alloys are available in our factory. Except the models listed below we can also produce customized inserts for aluminium turning as per your designs.?

?

Advantages:

?

Tungsten Carbide indexable inserts for aluminium machining:?
1. Made from virgin material?
2.?Efficient machining, good high-temperature stability
3.?Free technical support on line

4.?Easy to assembly, no crack or chipping

5. Superior wear resistance

6.?A comprehensive range of types?

?

Catalogue of Tungsten Carbide Inserts for Aluminium Machining:

?

- - - -
TYPE | Dimension(mm) | ? |
L | I.C | S | d | r | ? |
CCGX | (ISO) | (ANSI) | ? |
060202-TH | 21.50-TH | 6.4 | 6.35 | 2.38 | 2.8 | 0.2 | ? |
060204-TH | 21.51-TH | 6.4 | 6.35 | 2.38 | 2.8 | 0.4 | ? |
09T304-TH | 32.51-TH | 9.7 | 9.525 | 3.97 | 4.4 | 0.4 | ? |
09T308-TH | 32.52-TH | 9.7 | 9.525 | 3.97 | 4.4 | 0.8 | ? |
120404-TH | 431-TH | 12.9 | 12.7 | 4.76 | 5.5 | 0.4 | ? |
120408-TH | 432-TH | 12.9 | 12.7 | 4.76 | 5.5 | 0.8 | ? |
- - - -
?
- - - -
TYPE | Dimension(mm) | ? |
L | I.C | S | d | r | ? |
DCGX | (ISO) | (ANSI) | ? |
070202-TH | 21.50-TH | 7.8 | 6.35 | 2.38 | 2.8 | 0.2 | ? |
070204-TH | 21.51-TH | 7.8 | 6.35 | 2.38 | 2.8 | 0.4 | ? |
11T302-TH | 32.50-TH | 11.6 | 9.525 | 3.97 | 4.4 | 0.2 | ? |
11T304-TH | 32.51-TH | 11.6 | 9.525 | 3.97 | 4.4 | 0.4 | ? |
11T308-TH | 32.52-TH | 11.6 | 9.525 | 3.97 | 4.4 | 0.8 | ? |
- - - -

?

?

- - - -
TYPE | Dimension(mm) | ? |
L | I.C | S | d | r | ? |
TCGX | (ISO) | (ANSI) | ? |
110202-TH | 21.50-TH | 11 | 6.35 | 2.38 | 2.8 | 0.2 | ? |
110204-TH | 21.51-TH | 11 | 6.35 | 2.38 | 2.8 | 0.4 | ? |
16T304-TH | 32.51-TH | 16.5 | 9.525 | 3.97 | 4.4 | 0.4 | ? |
16T308-TH | 32.52-TH | 16.5 | 9.525 | 3.97 | 4.4 | 0.8 | ? |
- - - -

?

- - - -
TYPE | Dimension(mm) | ? |
L | I.C | S | d | r | ? |
VCGX | (ISO) | (ANSI) | ? |
110202-TH | 21.50-TH | 11 | 6.35 | 2.38 | 2.8 | 0.2 | ? |
110204-TH | 21.51-TH | 11 | 6.35 | 2.38 | 2.8 | 0.4 | ? |
110304-TH | 221-TH | 11 | 6.35 | 3.18 | 2.8 | 0.4 | ? |
110308-TH | 222-TH | 11 | 6.35 | 3.18 | 2.8 | 0.8 | ? |
160404-TH | 331-TH | 16.6 | 9.525 | 4.79 | 4.4 | 0.4 | ? |
160408-TH | 332-TH | 16.6 | 9.525 | 4.79 | 4.4 | 0.8 | ? |
160412-TH | 333-TH | 16.6 | 9.525 | 4.79 | 4.4 | 1.2 | ? |
110202-TF | 21.50-TF | 11 | 6.35 | 2.38 | 2.8 | 0.2 | ? |
110204-TF | 21.51-TF | 11 | 6.35 | 2.38 | 2.8 | 0.4 | ? |
110304-TF | 221-TF | 11 | 6.35 | 3.18 | 2.8 | 0.4 | ? |
110308-TF | 222-TF | 11 | 6.35 | 3.18 | 2.8 | 0.8 | ? |
160404-TF | 331-TF | 16.6 | 9.525 | 4.79 | 4.4 | 0.4 | ? |
160408-TF | 332-TF | 16.6 | 9.525 | 4.79 | 4.4 | 0.8 | ? |
160412-TF | 333-TF | 16.6 | 9.525 | 4.79 | 4.4 | 1.2 | ? |
- - - -

?

Surface Coating:

?

- - - -
Material | First layer | Second layer | Third layer | Fourth layer |
Ti8 | TiN | TiC | TiCN | TiN |
TAN | TiCN | TiC | Al2O3 | TiN |
Al2O3 | TiCN | TiC | Al2O3 | / |
Suggestion: We would like recommend suitable coated material depending on your requirement. |
- - - -

?

?

Picture Show:

?

Read More