Power Distribution Equipment

1. Home
2. Products
3. Electronic & Electrical
4. Power Distribution Equipment

Share us

High Pressure Resistance 4.2x2.2mm Injection Molding Electrical Heating Coil with Male Plug

-

Send Inquiry

Description

4.2x2.2mm?Injection?Molding?Heaters?Coil?with?Male?Plug

?

?

1.?Heaters?Coil?Brief?Introduction

?

Wuhan?Global?Metal?hot?runner?coil?heater?use?Germany?heater?wire,?United?States?high?purity?magnesium?

oxide?material,?and?strict?process?technology.?There?are?various??cross?section?and?size?for?choice,?such?as?

square,?round?and?flat,?provide?high?performance?electric?heater?for?heating?hot?runner?mold?and?other?fields.

?

Heater?maximum?temperature?up?to?650?oC,?the?integration?of?temperature?thermocouple?for?the?precise?

temperature?control,?can?provide?K,?J,?E?thermocouple,?blasting?and?blackening?surface?treatment,?also?can?

provide?bright?surface.

?

2.?Heaters?Coil?Characteristics

?

a.?The?inside?insulated?cover,?same?as?the?German?GC.

b.??High?insulation?(more?than?500M?ohm)?and?high?pressure?resistance?(1000V?above),?can?meet?special?

requirement?if?customers?need.?

c.??Very?good?performance?of?the?heating?uniformity?in?the?heating?area.

d.??The?moisture-proof?can?be?IP65,?suitable?for?working?in?bad?condition.

?

3.?Heaters?Coil?Application
# Injection?moulding?machine?nozzle
# Hot?Runner?Nozzles?&?Bushings.
# Packaging?machineries
# Hot?runner?Injection?moulds.
# Injection?&?Blow?Moulding?Machine?Nozzles.
# PET?prefrom?&?Thin?wall?container?Moulds
# Hot?runner?Manifolds.

4.?Heaters?Coil?Parameter.

- - - -
Spring?coil?heater?(H?series) | 3.0x3.0
3.3x3.3
4.0x2.0
4.2x2.2
4.5x2.7 | Φ3.0 | Φ4.0 | Φ5.0 | 3.5x3.5
4.0x4.0 | 5.0x5.0 |
Voltage | 220V,230V,240V |
Power?tolerance?115W-200W | +/-10% |
Power?tolerance??201W-2000W | +5%-10% |
Out?jacket?length | 30mm~280mm |
Diameter?of?the?inner?sleeve/wrapped?diameter | 10mm~42mm |
Unheating?length | 45mm |
Max?power?density | 9W/cm2 |
Heating?Length?tolerance | +/-0.05mm |
Unheating?length?tolerance | +/-2.5% |
Tolerance?ID?d?≤20mm | Without?inner?sleeve:-0.15mm
With?inner?sleeve:0.05mm~0.10mm |
Tolerance?ID?d?20mm~30mm | Without?inner?sleeve:-0.20mm
With?inner?sleeve:0.05mm~0.10mm |
Tolerance?ID?d?≥30mm | Without?inner?sleeve:-0.25mm
With?inner?sleeve:0.05mm~0.10mm |
Tolerance?cross?section | +/-0.15mm | +/-0.20mm |
Thermocouple | K,J,E | None |
Material | 304,321,316 |
Maximum?working?temperature | 650℃ |
Die?electrical?strength | 800V | 1000V |
- - - -

Read More