Cast & Forged

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Cast & Forged

Share us

12M Galvanized Electric Power Pole Q345 Material for 110KV Transmission

Electric Power Pole

Send Inquiry

Description

?12M Galvanized Electric Power Pole Q345 Material for 110KV Transmission

?

?

?Specifications:

?

- - - -
Suit?for? | Power Transmission |
Shape | Conoid?,Multi-pyramidal,Columniform,polygonal?or?conical |
Material | Usually?Q345B/A572,minimum?yield?strength>=345n/mm2
Q235B/A36,minimum?yield?strength>=235n/mm2
As?well?as?Hot?rolled?coil?from?Q460?,ASTM573?GR65,?GR50?,SS400,?
SS490,?to?ST52- |
Torlance?of?the?dimension | +-?2% |
Power | 10??KV?~550?KV |
Safety?Factor | Safety?factor?for?conducting?wine?:?8?
Safety?factor?for?grounding?wine?:?8 |
Design?Load?in?Kg | 300~?1000?Kg?applied?to?50cm?from?the?to?pole |
Marks | Name?plate?through?rivert?or?glue?,engrave?,emboss?as?per?customer?requirement |
Surface?treatment | Hot?dip?galvanized?Following?ASTM?A?123,?
color?polyester?power?or?any?other?standard?by?client?required |
Joint?of?Poles | Insert?mode,inner?flange?mode,face?to?face?joint?mode |
Design?of?pole | Against?earthquake?of?8?grade |
Wind?Speed | 160?Km/Hour?.??30?m?/s |
Minimum?yield?strength | 355?mpa |
Minimum?ultimate?tensile?strength | 490?mpa |
Max?ultimate?tensile?strength | 620?mpa |
Standard | ISO?9001 |
Length?of?per?section | Within?14m?once?forming?without?slip?joint |
Welding | We?has?past?flaw?testing.Internal?and?external?double?welding?makes?
the?welding?beautiful?in?shape?
Welding?Standard?:AWS?(?American?Welding?Society?)?D?1.1 |
Thickness | 1?mm?to?30?mm |
Production?Process | Row?material?test?→?Cutting?→Molding?or?bending?→
Welding?(longitudinal?)→Dimension?verify?→Flange?welding
→Hole?drilling?→Calibration?→?Deburr→Galvanization?or?
powder?coating?,painting?→Recalibration?→Thread?→Packages |
Packages | Our?poles?as?normal?cover?by?Mat?or?straw?bale?at?the?top?and?bottom?,
anyway?also?can?following?by?client?required?,?each?40HC?or?OT?can?
loading?how?many?pcs?will?calculation?base?on?the?client?actually?
specification?and?data |
- - - -

?

?

?The followed design is based on ASTMA 572 Gr 65 material,with octagonal cross section shape,while the ?safety factor is 1.8.If you have other requirement on load,height,material and cross section shape,pls ?contact us.

?

?

?

?

?Description:

?Standard?Accessory

?-Top?plate

?-Base?plate

?-Bottom?strip

?-Standard?hole

?-Climbing?rung

?-Anchor?bolt

?-Bitumen?protection

?-Painted?marking

?-Removable?ladder

?

?

?The information to inquiry or purchase
?-Steel pole height and force
?-Cross arm type and length,the position to install in the steel pole
?-The method to fix the cross arm(use bolt to connect or use one or two template to weld in the steel pole ?to install the cross arm)
?-Safety factor of the steel pole
?-Wind speed
?-Type of climbing rung
?-Destination port
?-Other.

?

?

Technical information-Cross Arm

?

?



?The above listed is the most frequently used design,and is made from angel steel.And the cross arm will ?be fixed to the pole shaft connecting by bolts through the pre-drilling holes on both the cross arms and ?the pole shaft.If you have any other requirements on the design,material and connecting method for ?cross arm,pls contact us.

?

?

?

?Company Introduction:
?Jiangsu Milky Way Steel Poles which established on 1991 is located in Wuxi,East of China ,near one of ?the largest sea port of China ,Shanghai,Port .
?Our Company has 24 years experience on producing the steel poles including the transmission power ?pole,street light pole,high mast pole and so on.
?We exported to oversea countries since 1991 and our products have been delivered to more than 70 ?countries and areas ,including America,Australia ,Russia ,Germany ,Span,Philippines ,Malaysia,Africa ?and so on.
?We are the supplier of many big project in many countries,like the street light pole of Dubai Tower.the ?high mast pole for Sochi Winter Olympic Game and so on.

?

?

?

?

?

?

?

Read More