Ingot
CRNGO Cold Rolled Silicon Steel Laminations 0.27mm / 0.30mm Gray For Power Transformer
UI-90
Description
CRNGO 0.27mm / 0.30mm Cold Rolled Silicon Steel Lamination Gray for Transformer
?
Specifications:
?
?
- - - -
Item | EI Transformer Laminations |
Type | Steel Coil |
Thickness | 0.35 ~ 0.50mm |
Width | According to your requests |
Coil Weight | 4 ~ 8 tons |
Material | BAO Stleel: B501300, B50A1000, B50A800, B50A700, B50A600, B50A470, B35A440, B35A550, B65A600, B65A1600 B WU Steel: 50WW1300, 50WW1000, 50WW800, 50WW700, 50WW600, 50WW470, 35WW350, 35WW310, 65AW600, 65AW1600 AN Steel: 50AW1300, 50AW1000, 50AW800, 50AW700, 50AW600, 65AW1600, 65AW600, 35AW440, 35AW550 Tai Steel: 50TW290, 50TW310, 50TW470, 50TW600, 50TW800 |
Surface Treatment | C-4 Insulated Coated |
OEM and ODM | Welcome |
Application | Motor, electric engine, dynamo, transformer, electromagnetic switch, reactor, magnetic amplifiers, ballast, relay, yoke flow circle and other industry usage. |
- - - -
?
Applicable to all kinds of transformer core
?
?
Feature:
?
1. Low iron loss, high magnetic flux strength, comes up to the international advance standard
2. Slight thickness difference between the horizontal and the longitudinal direction, promising the high lamination factor
3. Processing Performance: Easily punched and cut, high dimensional accuracy
4. Insulating Coating: Uniform color, good insulation, strong adhesive, high heat resistance, high putrescibility
5. Smooth surface, no rust, no rolling marks, no cold lap, no crease, no bubble cell, no delamination defects.
?
Description:
?
# # ?EI Lamination is made by the silicon steel strip. The model of EI lamination in standard sizes is from EI 28 to EI -240, and the model of EI lamination in non-standard sizes is from EI-36 to EI-360. the gap sizes of transformer lamination core can be customized.
# ?
# Three -phase EI lamination is made by the silicon steel strip. The model of three-phase EI lamination is from three-phase (20) to three phase (100), and the hole size is from Φ4.5 to Φ14, The gap sizes of transformer lamination core can be customized.
# ?
# UI lamination is made by the silicon steel strip.the model of UI lamination is from UI-30 to UI-100, and the hole size is from Φ 8 to Φ 14. The gap sizes of transformer lamination core can be customized.
?
- - - -
Dimension:mm (UI Series) |
Size | A | B | C | D | E | HOLE(Φ) |
UI20 | 60 | 20 | 60 | 20 | 20 | 4.5 |
UI22 | 66 | 22 | 66 | 22 | 22 | 6 |
UI25 | 75 | 25 | 75 | 25 | 25 | 4.5 |
UI27 | 81 | 27 | 81 | 27 | 27 | 4.5 |
UI28 | 84 | 28 | 84 | 28 | 28 | 4.5 |
UI30 | 90 | 30 | 90 | 30 | 30 | 8 |
UI32 | 96 | 32 | 96 | 32 | 32 | 8 |
UI35 | 105 | 35 | 105 | 35 | 35 | 8 |
UI37 | 111 | 37 | 111 | 37 | 37 | 8 |
UI38 | 114 | 38 | 114 | 38 | 38 | 8 |
UI40 | 120 | 40 | 120 | 40 | 40 | 10 |
UI44 | 132 | 44 | 132 | 44 | 44 | 8 |
UI45 | 135 | 45 | 135 | 45 | 45 | 10 |
UI50 | 150 | 50 | 150 | 50 | 50 | 8 |
UI60 | 180 | 60 | 180 | 60 | 60 | 14 |
UI70 | 210 | 70 | 210 | 70 | 70 | 14 |
UI80 | 240 | 80 | 240 | 80 | 80 | 14 |
UI90 | 270 | 90 | 270 | 90 | 90 | 14 |
UI100 | 200 | 90 | 300 | 100 | 100 | 14 |
- - - -
?
?
Our advantages
?
1. Low MOQ: It can meet your promotional business very well.
2. Good Service: We treat customers as our friends.
3. Good Quality: We have strict quality control system; don’t sell the poor quality goods
4. Best price: Choosing superior resources from more than five factories for you
5. Fast & Cheap Delivery: We have big discount from forwarder.
Read More
Jiangyin Chuangjia Electrical Appliance Co., Ltd.
Silicon Steel Laminations,EI Transformer Laminations,Electric Motor Laminations
Address: Sanlian Village,Xiagang Town,
Wuxi, Jiangsu
China, 214000
Tel: 86-510-86031288
Fax: 86-510-86033888
