Generators
LSA PLUS Krone Disconnection Module , Krone Module 10 Pair For Telecommunication
XL-011
Description
10 Pairs LSA-PLUS Krone Disconnetion Module
?
Features:
1) Temperature: -5 - 40°C
2) Relative humidity: <85% (+30°C)
3) Atmospheric pressure: 70 106KPa
4) Material: stainless steel and cuprum, cuprum gold plating over nickel
5) Performance of anti-burn: PPT (UL94V-0) or anti-burn ABS (UL94V-0),
combustibility of GB/T 5169.7-1985 standard
6) Construction features: adopts modularization design, elegant
outlook and high endurance
7) Pulling-out force: tin bronze and silver plating (20 - 40uinch), pulling-out
force not less than 25N
8) Intermediate resistance between reed terminators: no more than 7m
(ohm between intermediate reeds under standard examination
condition)
9) Intermediate resistance: no more than 3m ohm under standard
examination condition
10) Performance impedance: 120Ω (balance)
11) Work rate: 2mb/s
12) Insulation resistance: 1,000mΩ / 500V (DC)
13) Resistance to voltage: no breakdown or arc for 1 minute under 1kV (DC)
14) Crosstalk ratio: ≥60dB (50kHz - 210MHz)
15) Plug-in loss: ≤0.4dB (50kHz - 210MHz)
16) Back wave loss: ≥18dB (50kHz - 210MHz)
17) Life: 200 cycles
?
Technique Characteristics:
?
The disconnection type CT module have provision of testing the electrical parameters of the exchange and distribution sides by insertion of test plug without actually disconnecting the jumper wire or the cable from the termination module.
?
The module housing material we mainly offer with imported GE PBT and ABS(UL94V-0).Both material we will use new rall material but not recycling material(first recycling or second recycling).So we can offer good performance modules.You can get very cheap products in the market but they are mainly made of such recycling material PBT or ABS.
?
- - - -
Mechanical Performance | Insertion force : 40~75N |
Pull Out Force : F≥25N(axial) F≥7.5N(radial) |
IDC Life : 200 times(20-26 AWG Solid wire) minimum |
Copper Conductor Diameter: Φ0.4~Φ0.8(mm) |
Environment Characteristic | Storage Tempreture: 40 to 70°C |
Operating Temperature : 10 to 60°C |
Relative Humidity: 95%, noncondition |
Electrical Performance | Insulation resistance: 1000 Mohms minimum |
Contact resistance:7 mohms maximum |
Dielectric intensity: AC 1000 Vrms 50Hz or 60Hz in 60s ? |
- - - -
?
?
?
?
Read More
Cixi Anshi Communication Equipment Co.,Ltd
Fiber Distribution Box,FTTH Distribution Box,Cable Distribution Box
Address: No.598, Zhangxin (North) Road, Xiaolin Town, Cixi City, Zhejiang Province. China,
Ningbo, Zhejiang
China, 315000
Tel: 86-574-63501950
Fax: 86-574-63503588
