Electronic Signs
Description
?
DIN Rail Optical Ethernet Switch 10 / 100 / 1000M With Dual Power
?
Quick Detail:
* 10/100/1000M DIN-Rail Mount Industrial fiber Switch
* Managed fiber switch
* single mode or multi mode is optional?
* 4X1000Mbps SFP optic ports+ 2X100Base-FX Ports + 8X 10/100Mbps rj45 ports
*? dual power supply
* Support Ring Network designed
?
10/100/1000M DIN-Rail Managed Industrial Ethernet Switches
TES0-IES002 series is a managed Layer 2+ industrial Optical Ethernet switch with 4*1000Mbps SFP optic ports, 2*100Base-FX Ports and 8* 10/100Mbps electrical ports. it is designed to meet the various industrial application needs, and provide an industrial Ethernet network communication solution with a high performance-price ratio. TES0-IES002’ s high availability and reliability, as well as the rich security features, makes it ideal for secure data transmission. TES0-IES002 also features powerful Web-based, CLI management capabilities, wide input range dual power supply and its support for DIN rail and panel mounting for installation in the industrial environment.
?Ring Protection designed specifically for industrial applications, to provide a fast Ethernet ring protection and recovery within 15ms.From the management console, uses can choose any port (normal Ethernet port or trunk port) to form an Ethernet ring for faster recovery and wider bandwidth.
?
Key Features
*Ring Protection, Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) for Ethernet ring protection and quick recovery
*8K address table for auto-learned unicast addresses
*4K VLAN, supports 802.1Q, port based, protocol based VLAN, as well as Generic Attribute Registration Protocol (GARP) and GARP VLAN Registration Protocol (GVRP) for flexible network planning and management
*Flexible load distribution control and fail-over function
*Manual, static and dynamic port Static and dynamic port aggregation for bandwidth management
*Port rate limit, broadcast storm control, port mirroring, rich Quality of Service (QoS) features for data traffic control and management
*Blackhole MAC address filtering, static and dynamic MAC address management for network security
* Access Control Lists(ACL)
*Secure Shell (SSH) v2.0
*IGMP snooping
*SNTP, SMTP
*SNMP V1, V2c, V3
*Supports RMON statistics, history, alarm and event
*Web-based network management interface
*Supports port and VLAN management
*On-line firmware upgrade
*Two privilege level accounts
*Syslog
*Dual power input for high reliability
*DIN rail or panel mounting for easy installation
?
Performance
802.3 10Base-T Ethernet
802.3u 100Base-TX and 100Base-FX fast Ethernet
802.3x Flow Control and Back Pressure
802.1p Class of Service
802.1Q VLAN Tag
802.3ad LACP
802.1d STP
802.1w RSTP
?????? ? ? ?? 802.1x
*Non-blocking store-and-forward shared-memory switch architecture
*MAC address:8K
*Network management: Web-based, CLI
*Fast Ethernet Ring Protection: recovery time within 15ms
*Firmware upgrade: Web, online?
?
Port configuration
*RJ45 Port: Auto-negotiation, 10/100Base-T, Full/Half Duplex, Auto-MDI/MDIX, on copper cable of cat5# with operation distance of less than 100 meters.
*100Base-FX Optical Port:100BaseFX ports (SC/ST, optional)
*Single-mode:20, 40, 60, 80, 100,120Km,optional
*Multi-mode: 2, 5Km,optional
*Wavelength: 850nm, 1310 nm, 1550nm
*DOWNLOAD PROGRAM Port: Based serial network management (RS-232), RJ45
*Alarm output interface: One relay alarm output. Support power, port link and ring network alarm
*Indicator: Port link, ring fault/abnormity alarm indication 10M/100M Rate, run indication
?
Power requirements
*Input Voltage: 24 VDC (18 to 36VDC), redundant dual inputs
*Input Current:
# IDS 508 : <0.24A@24VDC
# IDS 508-4F: <0.40A@24VDC
# Overload Current Protection: Present
# Reverse Polarity Protection: Present
# Connector: 6-contact terminal blocks
?
Environmental limits
*Operating Temperature:
# 0℃ ~+ 60℃(Normal Temperature)
# -40℃ ~+ 80℃( Wide Temperature)
*Storage Temperature:-40℃ ～+ 85℃
*Humidity: 5%～95%
?
Mechanical Dimension
*Dimensions: 61 x 120 x 140 mm
*House Protection: IP40 protection, Aluminium Alloy
*Installation: DIN-Rail or wall mounting
*Weight: 780g
?
Approvals
*EMI: FCC Part 15 Subpart B Class A, CISPR (EN55022) class A
*EMS:
# EN61000-4-2 (ESD),Level 3
# EN61000-4-3 (RS),Level 3
# EN61000-4-4 (EFT),Level 3
# EN61000-4-5 (Surge),Level 3
# EN61000-4-6 (CS),Level 3
# EN61000-4-8,Level 3
*Shock: IEC 60068-2-27
*Free Fall: IEC 60068-2-32
*Vibration: IEC 60068-2-6
?
Warranty
5 years
Read More
SuperHighEnergy Technology(HK)CO.,LIMITED
Network Rack Cabinet
Address: 6F,LongTaiLi S&T Building,No.30 Gaoxin C.Avenue 4th,S&T Park,Nanshan,
Shenzhen, Guangdong
China, 518000
Tel: 86-755-86052245-808(
Fax: 86--86052245-816
