Others
Description
?
CE Certificate Small Swing Arm Robots for 50~180T Injection Moulding Machine
?
?
Swing Arm Robot- (for Horizontal IMM use)
Swing-Arm Robots are extensively applied to horizontal / vertical plastic injection machines ranging from
50T~ 250T which can rapid take out the runners, runner and finished products from the mold of plastic
injection molding machines, and place runners or runner into beside-the-press granulator for recycling
immediately.? There are two types of arms-single stage and telescopic.? The vertical stroke for single
stage is 550mm and for telescopic is 650mm.? This series equipped with wrist rotation mechanism and
gripper sensor can rotate products with 90°.
?
?
Structural Units
Employed high strength & tension aluminum alloy to work with precise linear guide way, features with light
weight, wear resistance, long service life.
?
Wrist Rotation Mechanism
The arm front section for installing gripper can rotate 90°; absorbs & gripper jig can be installed with
sensor device for detecting to get products or not.
?
?
Function Features
1. X axis can rotate 90° which is for changing molds conveniently, equipped with hydraulic shock absorber
? ? for making forward & backward stroke more stable and smooth.??
2. Y axis is equipped with device to avoid pneumatic cylinder falling.
3. Z axis can be adjusted angle from 45°~90° for placing finished parts by different direction according to
? ? requirement? ( to place parts at the operate side or non-operate side of injection molding machines).
?
?
Safety Protection
External signal interlock with injection molding machine to have double safety protection for molds to
ensure no locking molds if parts are not taken out via the signal confirmation of finished product removal.
?
?
Control System
Palm controller, friendly operation interface, easy operation.
?
?
Model Features
X-650PR are mainly used for removal of runner & runner and finished products from 3 plate mold
simultaneously and any arm can be used independently for remove finished parts or runner.
?
?
Specification
?
- - - -
?Model | ?XW-650PR |
?Type | ?Double-stage |
?I.M.M.Range | ?120~180T |
?Vertical Stroke | ?650mm |
?Crosswise Stroke | ?150mm |
?Swing Angle | ?50~90 degree |
?Gripper Rotation Angle | ?90 degree |
?Max.Load | ?3 kg |
?Min.Take Time | ?0.7 sec. |
?Dry Cycle Time | ?4.0?sec. |
?Drive System | ?Air Pressure |
?Working Air Pressure | ?0.5~0.7MPa |
?Air Consumption | ?13L/cycle? |
?Power Consumption | ?2.2kw |
?Power Supply | ?AC220V/1P/50HZ? |
?Weight | ?47.5kg |
- - - -
?
?
Read More
GUANGDONG TOPSTAR TECHNOLOGY Co.,Ltd
Industrial Robotic Arm,Swing Arm Robot,Dehumidifying Hopper Dryer
Address: No.90 Xintang Xin Road, Xintang Dalingshan Town, Dongguan City, Guangdong Province, 523822, China,
Dongguan, Guangdong
China, 523822
Tel: 86-769-85390821
Fax: 86-769-85845562
