Industrial Supplies Stocks
Height control CNC Plasma Cutting Machine for shipbuilding , Single side gear and rack driving
CNC-FP series
Description
Height control CNC Plasma Cutting Machine for shipbuilding , Single side gear and rack driving
?
Quick Details
?
# All of our CNC cutting machines can be equipped with oxy-fuel and/or plasma cutting equipment;
# American Hypertherm, American Thermadyne, Germany Kemper and domestic plasma sources for options;
# Capacitive height controller and auto-igniter for flame torch; arc-voltage height controller for plasma torc;
# Australia FASTCAM auto programming and nesting software;
?
1. Introduction
?
Developed and designed in-house and tested in practice, we have produced a series of cutting machines and cutting lines that will be regarded as industry leading since 2003. All of our CNC cutting machines can be equipped with oxy-fuel and/or plasma cutting equipment.
This series CNC flame&plasma cutting machine is developed based on the plasma cutting technology home and abroad. It can equip the American Hypertherm, American Thermadyne, Germany Kemper and domestic plasma sources.
Guoheng earned its global market position by offering extremely innovative cutting solutions for customers in steel construction, offshore, shipbuilding, process and crane building industry.
We also provide user-friendly broad choices and options that allow you to configure your CNC cutting system with the capacities, speed and accuracy of your needs.
?
2. Main Parameters
?
- - - -
Model | CNC-FP25 | CNC-FP30 | CNC-FP40 | CNC-FP50 | CNC-FP60 | CNC-FP70 | CNC-FP80 |
Drive system | Single side gear and rack driving | Double sides gear and rack driving |
Rail span mm | 2,500 | 3,000 | 4,000 | 5000 | 6000 | 7000 | 8000 |
Valid working width mm | 1,700 | 2,200 | 3,200 | 4200 | 5200 | 6200 | 7200 |
Strip/straight cutting width mm | 80—1,700 | 80—2200 | 80—3200 | 80—4200 | 80—5200 | 80—6200 | 80—7200 |
Rail length mm | 15,000 (valid cutting length 12,5000), fine machining I-rail |
Torch lift stroke mm | 150 |
Flame cutting speed mm/min | 50—1,000 (setting as per cutting technology) |
Fast return speed mm/min | 4,000 |
Flame cutting material | MS |
Flame cutting thickness mm | 6—150 (single torch), piercing thickness≤100 |
Plasma cutting thickness mm | Depend on plasma power source |
Plasma cutting speed mm/min | Depend on plasma power source |
Plasma cutting material | MS, Aluminum, SS |
Intersection point deviation mm | ≤0.5 (800*800 industry standard prescribed figure lineation) |
Diagonal error mm | ≤0.5 (square lineation) |
Power supply | AC380V 50HZ 3P or tailor made |
Above are our standard models and parameters, and it can be designed and manufactured on request. |
- - - -
? ?*We reserve the right to alter specifications without prior notice.
?
3. Main features
?
The standard models of our CNC flame&plasma cutting machines have the following features:
# Robust all steel fabrication with stable structure and good rigidity, and no deformation after long time using;
# Micro-step SH-2200AH CNC system;
# Capacitive height controller and auto-igniter for flame torch; arc-voltage height controller for plasma torch
# Australia FASTCAM auto programming and nesting software;
# Both longitudinal and transverse drives adopt Japan Panasonic high precision A.C. servo motor, Germany NEGUART high precision gear reducer and high precision gear and rack.
# The brushless AC servo motor has high torque, high resolution and high inertia.
# Longitudinal rail is fine machining rail. Rack material is 45# steel, fixed in rail by bolt in sections.
# Advanced PC-Based CNC controller with faster processing speed & greater accuracy improves productivity. This CNC controller features a Windows operating system and colored LCD screen.
# Germany IGUS transverse drag chain;
# Limit switch for gantry travel;
# Heat treatment to main welding parts after welding; sand blasting treatment to main welding parts before painting;
# High intensive heat-resisting gas supply pipe;
# Backfire arrester and solenoid for cutting oxygen for torch;
# All motion parts have lubrication system;
# Main electric elements are ABB/Siemens brands;
# Hand pendant;
# Lifting lug;
# Standard color:
?
Optional features:
?
# American HYPERTHERM edge Pro CNC system;
# Spanish FAGOR CNC system;
# American BURNY 10LCD plus;
# Dust collection system for plasma cutting: dry type or underwater type;
# Triple torch for X, Y, V&K type bevel;
# Powder spray marking function;
?
4. Plasma power source
?
Please select the suitable Hypertherm plasma system (made in USA) according to the following introduction.
1) Hypertherm Plasma Capacity Chart
?
2) Air Plasma: PowerMax
?
3) LongLife Air and Oxygen Plasma: Maxpro200
?
4) HyPerformance Plasma: HPR*XD
?
5. Reference drawing
?
?
6. Reference photo
?
?
?
7. Comparative advantage
?
# ISO9000&CE certified;
# Professional and experienced engineer team to ensure the advanced design about structure and electric;
# Experienced and skilled workers to care for each work flow from material cutting, welding, grinding to final assembly and testing to ensure high machine quality;
# Professional and experienced after sale service team to guarantee quick and satisfied installation, commissioning or service;
# Optimum materials and outsourcings to ensure the best performance;
# Commissioning and testing before delivery;
# Factory inspection is encouraged;
?
Read More
Wuxi Guoheng Machinery Co.,Ltd
Pipe Welding Rotator,Welding Rotator,Self Aligning Rotators
Address: 100# Tianshun Road, Yangshan Associated Industrial Park,
Wuxi, Jiangsu
China, 214000
Tel: 86-510-83050687
Fax: 86-510-83050787
