Electronics Designing & Processing
Description
Product Description
Airlaid paper is a textile-like material categorized as a nonwoven fabric?made from fluff pulp.?The airlaid paper making machine is produce the airlaid paper. There are different airlaid paper making lines for the production of basic materials for soft and absorbent disposable products for the following industries and applications:
1. For home care, like napkins.
2. Food packing applications
3. Industrial wipes
?
Technical specifications
- - - -
Width | 2100mm |
Capacity | about 12ton/24hr |
Weight | 45-600g/m2 |
Production rate | 200m/min |
Raw materail | baled fluff pulp, ES fibers, etc. |
Heating method | electric heating, oil heating, natural gas heating |
Technology type | Latex bonding type |
- - - -
?
Technological process
1. Wood pulp →Pre Grinder→Main Grinder→Storage tank→Batching machine→
2. Fiber → Automatic feeding machine → Direct feeding type Batching machine →
1. and 2.?→?Mix feeding Fan → Forming part → Excessive part → Swelling part → Compaction part → Automatic winding and changing roll part
?
Equipment composition
Airlaid paper production line consists of a feeding system and main manufacturing part system.
Feeding system consists of Direct feeding type batching machine, Pre Grinder, Main Grinder, Storage tank, Batching machine, Mix feeding Fan and etc.
Main manufacturing part system consists of Forming part, Excessive part, Heating part, cooling part, Transmission pary, Brush net part, Automatic winding and changing the roll and etc.
?
Operational principle
This equipment is based on the principle of & quot;long network operation, airlaid forming, hot air penetration& quot;:
The wood pulp were used as raw materials, will be brinded after brinding system, feeding to the Storage tank. Then feeding in to forming part by the Batching machine.The short fibers were used as raw materials, feeding into the brinding machine by Automatic feeding machine. After brinding, feeding into the forming part by Direct feeding type batching machine.Then the mix wood pulp and fiber are lapped by airlaid forming machine, through the Excessive part, go into the heating part, cooling part and paper will automatically change the volume by Automatic winding and changing roll part.
Start the wood pulp feeding system and fiber feeding system, wood pulps and fibers are feeding into forming part by feeding fans. According to the adsorption of the molding box to achieve uniform blanking, and the formation of paper. The paper passed through the main forming part, Excessive part, and heating part. In the heating part the hot air melt the PE of the fiber, in order to achieve the purpose of bonding the wood pulp fiber. And finally complete the paper roll by the winding machine.
# The pulp was treated with the treated pulp, and ES fiber was selected as a two-component fiber of PE/PP. Adding ES fiber 20-25%, wood pulp fiber proportion of the 75-80%, The increase of ES fiber ratio, Zorbcor strength increases but the water absorption decreased, on the other hand, reduces the intensity of dust and increased.
# The air heating temperature of the oven is controlled at 140-145℃, which is used for the outer PE of the ES material in the melting paper, but can not melt the inner layer PP.
Final product
?
Requirements for workshop
The workshop space should not be less than L60m*W12m*H7m. The Buyer should give the Seller workshop diagrams with upright post, door, window, partition wall, upper and lower water, etc. In order to determine the installation and installation requirements.
?
FAQ
?
Q1: I’m interested in your products, but now I’m out of China; could you offer your machines?to my country?
A1: Sure! We’ve got full exportation experience, and no matter where you are, we may arrange the delivery for you?by sea.
Q2: What product is this machine making? And what& acute;s the application of the product?
A2: This machine is making airlaid paper. Airlaid paper is the absorbent material. It is raw material of sanitary napkins and diapers. Airlaid paper is also used for food absorption, cleaning wipes, linen like napkins.?
?
Q3: what& acute;s the min. and max. product weight?
A3: The min. weight of airlaid paper is 40gsm, the max. weight of airlaid paper is 600gsm
Q4: what& acute;s the min. and max. product width?
A4:?The min. width?of airlaid paper is 1000mm, the max. width?of airlaid paper is 2500mm
Q5: What is your manufacture lead time for our order?
A5: Our normal lead time is 120-180?days. If you have urgent request, please just let us know. We will try our best to shorten the lead time to meet your requirements.
Q6: How can I release the payment to you?
A6: We can receive your payment by Bank Account, Western union or others.
?
?
Read More
Shanghai Fiber Han Co., Ltd
Non Woven Fabric Making Machine,Spunlace Nonwoven Machine,Needle Punch Nonwoven Machine
Address: Room 1209,Building3,No.655 Gaoji Road,Songjiang Area,Shanghai, China,
Shanghai, Shanghai
China, 200000
Tel: 86-139-17834693
Fax: 86-139-17834693
