Used Machinery
40 - 120 Gallon 10 Bar Air Compressor Receiver Tank With Double Sided Welding
SJ-300-85
Description
1. The Role of air compressor receiver tank?
?
- - - -
1 | Storage of air and energy |
2 | Reduce the pressure pulsation of compressor exhaust continuously ,to achieve the balance |
3 | Reduce the temperature of the compressed reducing filter and desiccant load. |
4 | Reduce filter and desiccant load |
- - - -
?
?
2. Product advantages
?
- - - -
1. Design | Free design according customer& acute;s requirement |
2. Finished | With in house Blast Cleaning and Paint Spray facilities, Internal and External finishes to specific BS/EN/ISO standards are common practice. Galvanization, Epoxy Resin, DWI approved paint, and other finishes at your request. |
3. Testing | Materials, Processes, and Final Products are tested in a variety of ways, including: X-Ray, Tensile Tests, Hardness Tests, Dye Penetration, Hydrostatic, Radiographic etc. |
4. Document | Full Certification can be supplied: – Certificates of Conformity, Hydraulic tests, weld procedures, weld tests, material certificates, pressure gauges, relief valves etc. upon your request. |
- - - -
?
3. Function
?
1. Energy storage (for emergency needs)
2. Stable pressure
3. Ease pulse impact on gas equipment
4. To precipitate water, grease & dust in the air
5. Improve the continuity and stability of the equipment for the gas output
6. Reduce the frequent start of the compressor, extend its life
?
4. Our Advantages
?
- - - -
1 | Double-sided welding for all the connecting pipes |
2 | All the connecting pipes are sealed by plastic parts |
3 | Section design for the air inlet |
4 | Sewage valve with elbow design |
5 | Longitudinal seam, ring seam welding, double - sided submerged arc welding |
6 | Surface treatment: sandblasting , primer (2 times), finish |
- - - -
?
5. Our production process
?
1. Lofting, marking-off & cutting.
2. Manufacturing & welding
a. Make holes
b. Crimping plate
c. Spheronization
d. Welding
e. Install
f. Circumferential welding
3. Surface treatment
a. For Carbon Steel (1)Sand blasting (2)Primer (for 2 times) (3)Finishing coat
b. For Stainless steel (1)Sand blasting OR (2) Polishing
?
Read More
Shanghai Fengxian Equipment Vessel Factory
Air Compressor Receiver Tank,Vertical Air Receiver Tank,Horizontal Air Receiver Tanks
Address: No.2108 Huhang Road Nanqiao Town Fengxian distric Shanghai,
Shanghai, Shanghai
China, 200000
Tel: 86-21-67192016
Fax: 86-21-37110818
