Industrial Washing Machine

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Industrial Washing Machine

Share us

Electrical Onshore Steel Oil Drilling Rig , Oilfield Drilling Equipment 4000 - 7000 m

AIA-1

Send Inquiry

Description

Top quality Standard oil drilling rig ZJ50/3150D , Oil Drilling Equipment

?

Description:

?

HYRD provides model ZJ50/3150D electrical onshore drilling rigs which are designed to drill and complete an oil and gas well with depth from 4000 m to 7000 m.

???? The Rig components such as mast, substructure, traveling block, hook, swivel, rotary table, drawworks, etc, conform to API specifications and the industry standards.

???? The mast fabricated in a pin connection type cantilever structure, monkey board, stabbing board and other mast auxiliaries equipped the mast assembly, its design is suitable to install top drive unit.

???? The substructure can be manufactured in two-step raising and/or box-on-box substructure. And steps, handrails, BOP handling system and other appendixes equipment and facilities fully equipped with the substructure.

???? The main rig power system are diesel engine driven AC generators with enough power for operating the rig.

???? The power drive system available in SCR (AC-SCR-DC) or VFD (Variable Frequency Drive, AC-DC-AC) System.

???? The drawworks electrically driven by heavy duty DC or AC motors, with working speed continuously adjustable. Disc brake introduced as the main drum brake equipped with the drawworks unit.

???? The mud pumps equipped with the rig are single action, triplex slurry pumps, electrically driven by AC or DC motors.

???? Rotary table independently driven by a drive system consisting of truck motor.

???? Air system equipped with the rig, consisting of two each screw rod type air compressor, air tanks and valves.

???? A fully equipped mud circulation system including mud tanks, solids control equipment, mud conditioning equipment and circulation lines completed with the rig package.

???? An analog and digital drilling parameter and data monitor and recording system available on the rig.

???? BOP and well/choke equipment and facilities shall be equipment with rig package according to client’s requirement.
? Specifications : ?
- - - -
?ZJ50/3150D | DW, RT and mud pump realize independent DC stepless speed regulation which provide guarantee for drilling technology optimization.
Mast, substructure and drill floor equipments can be installed at lower position, and then be lifted integrally upon DW power.
Auto-bit-feeding adopts all-digital auto control technique, driller operates the touch screen to fulfill drilling operation through optimized drilling parameters, which will reduce labor intensity significantly and improve work efficiency. Display, restoration, regulation and control, remote management of major drilling parameters can be realized. | ? |
? |
? |
Main technical parameters | ? | ? | ? | ? | ? | ? |
1 | Nominal drilling depth | 5000m ( 114mmDP ) | 10 | Substructure type | slingshot type | Swing up type |
4500m ( 127mmDP ) |
2 | Max hook load | 3150kN | 11 | Substructure height and clear height under RT beam | 9m / 7.62m | 9m /7.75m |
3 | Wire rope system of traveling system | 6×7 , parallel | 12 | Mast type and effective height | K TYPE , 45m |
4 | DW rated power | 1100 kW (1500hp ) | 13 | Transmission mode | AC-SCR-DC |
5 | DW gear | 4 forward+ 4 reverse , stepless speed regulation | 14 | Quantity and power of main generator set | 3 × 1200 kW |
6 | Diameter of drilling wire rope | φ 38mm | 15 | Quantity and power of auxiliary generator set | 1×292kW |
7 | RT opening diameter | 952.5mm ( 27 1/2″ ) | 16 | Quantity and power of DC motor | 7 × 800kw (DC) + 1 × 45kw(VF) |
8 | RT gear | 2 forward | 2 reverse | 17 | HP mud manifold | Φ 103mm ( bore diameter ) ×35MPa |
9 | Quantity and power of drilling pump | 2 × 1600 hp pump | 18 | Effective mud volume of solid control system | 320m3 |
- - - -
? ?

Read More