Draught Fan
Portable NDT Inspection Equipment , Ceramic Tube Digital Ultrasonic X Ray Flaw Detector
XXG-2005
Description
?
Portable NDT Inspection Equipment , Ceramic Tube Digital Ultrasonic X Ray Flaw Detector
?
?
Features
1. An overall self-diagnosis for software and?hardware after startup can effectively detect the?failure component.
2. Strong anti-interference properties make our X ray?Equipment can also work with electric generator
in the wild field.
3. Quickly and exactly set exposure parameters by?manual button.
4. High voltage can be started delayed to make?enough time for personnel evacuate.
5. Slowly increase and decrease high voltage to?protec X-ray generator
6. The ratio of working and rest is 1:1
7. Complete protection measure against over-?KV,over-mA,under-KV,under-mA,over-temperature
and sound & light alarm
8. This x-ray machine is of portable structure,and?convenient for operating on site
9. High voltage coil is made from imported?insulating & temperature-resistant materials
10. Our portable NDT X-ray equipment is?small in size,light in weight,and convenience?to operate
11. The X-ray Generator is SF6 gas?insulated,ground anode,and adopts forced air?cooling
12. A safety warning light is installed on the x ray?generator,which is convenient for the?operators.
?
Product introduction
SF-05 controller is designed with new framework, which can match with all kinds of X-ray generator at
home and abroad and be compatible with a variety of models and parameters. The controller features
user-friendly interface, Chinese subtitles display in LED, shuttle knob for parameter adjustment, and
easy operation. The internal loop is of modular structure with high reliability, convenient dismounting and
maintenance. The controller applies automatic training mode by which the generator discharges to
reduce the voltage automatically, so as to protect the service life of X-ray tube. Accurate fault detection
facilitates the use and maintenance.
?
Product Parameters
All series are configured with SF-05 controller;
Outer dimensions: 325×272×180 mm (excluding convex part of the handle)
Box weight: 9kg
Power input: AC120V-265V (the control system is compatible with full voltage and can meet
requirements of different generators for the lowest voltage)
Power: ≥ 3KW
Output voltage: DC80V-250V (Continuously adjustable for different generators)
Control mode: Adaptable to chopping variable frequency control
?
Products Parameters
- - - -
Product Model | Voltage (KV) | Maximum Rating (kW) | Focus size (mm) | Radiation Coverage | Max. Penetration A3 Steel (mm) | Generator Weight (kg) | Generator Dimensions (mm) |
XXG-1605 | 30-160 | 1.8 | 1.5*1.5 | 40+5° | 20 | 20 | 220*220*560 |
XXGH-1605P | 30-60 | 1.8 | 1.0*2.0 | 360*25 | 18 | 20 | 220*220*560 |
XXGH-1605Z | 30-160 | 1.8 | 1.0*3.5 | 360*30 | 18 | 20 | 220*220*560 |
XXG-2005 | 100-200 | 2 | 2.0× 2.0 | 40+5° | 30 | 20 | 200* 200*600 |
XXGH-2005P | 100-200 | 2 | 1.0*2.0 | 360*25 | 28 | 26 | 250* 250*620 |
XXGH-2005Z | 100-200 | 2 | 1.0*3.5 | 360*30 | 25 | 26 | 250* 250*620 |
XXG-2505 | 130-250 | 2.5 | 2.0*2.0 | 40+5° | 40 | 28 | 260*260*740 |
XXGH-2505P | 130-250 | 2.5 | 1.0*2.2 | 360*25 | 35 | 28 | 260*260*740 |
XXGH-2505Z | 130-250 | 2.5 | 1.0*5.0 | 360*30 | 35 | 28 | 260*260*740 |
XXG-3005 | 150-300 | 3 | 2.5*2.5 | 40+5 | 50 | 34 | 320*320*820 |
XXGH-3005P | 150-300 | 3 | 1.0*2.5 | 360*25 | 45 | 34 | 320*320*820 |
XXGH-3005Z | 150-300 | 3 | 1.0*6.0 | 360*30 | 45 | 34 | 320*320*820 |
XXG-3505 | 200-350 | 3.5 | 2.5*2.5 | 40+5 | 60 | 35 | 320*320*820 |
XXGH-3505P | 200-350 | 3.5 | 1.0*2.5 | 360*25 | 55 | 35 | 320*320*820 |
XXGH-3505Z | 200-350 | 3.5 | 1.0*6.0 | 360*30 | 55 | 35 | 320*320*820 |
- - - -
?
Read More
Wuhan HAE Technology Co., Ltd.
NDT Inspection Equipment,Non Destructive Testing Equipment,Ultrasonic Flaw Detector
Address: E1 building, Optics Valley Software Park,
Wuhan, Hubei
China, 430000
Tel: 86-27-87508600
Fax: 86-27-87057728
