Power Distribution Equipment
Description
MEGATRO provide every type of 30FT distribution pole, mainly for city power grid and power distribution network. Most of power voltage as 35KV, 66KV, 132KV, 220KV, after fabrication all distribution poles are delivered to the galvanizing facility to be Hot Dip Galvanized. Distribution poles are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers. MEGATRO& acute;s distribution poles can accommodate a variety of cross-arm.
The 30FT distribution pole specification as follows:
TOP DIAMETER: 127MM
BOTTOM DIAMETER: 226MM
LENGTH: 9150MM
THICKNESS: 2.5MM
ON THE BOTTOM OF POLE, WE ALSO FIXED WITH ANTI-SINK STRAPS.
1 ALL STEEL PLATES TO CONFORM TO ASTM A572 GR50 OR ANY EQUIVALENT.
2 ALL WELDS ARE TO CONFORM TO AWS D1.1.
3 ALL SHAR EDGES AND BURRS TO BE REMOVED.
4 ALL TAPER LOCK JOINT LENGTHS ARE NOMINAL U.O.N.
5 ALL STEEL TO BE FULLY HOT DIP GALVANIZED AFTER FABRICATION IN ACCORDANCE WITH ASTM A123.
Read More
Qingdao Megatro Mechanical and Electrical Equipment Co.,Ltd.
power transmission line steel tower, telecom tower, wind turbine, wind tower, lamp post
Address: 288, Zhuhai Road, Huangdao district, Qingdao city, Shandong Province, China,
Qingdao, Shandong
China, 266400
Tel: 86-532-55588298
Fax: 86-532-55588276
