Power Distribution Equipment

1. Home
2. Products
3. Electronic & Electrical
4. Power Distribution Equipment

Share us

110kv lattice steel tower

MGP-110LST01

Send Inquiry

Description

110KV lattice steel tower
Steel lattice structures of rolled equal angles, either fully bolted together or partially so in combination with welded sections. The surface of these items is protected by hot galvanisation or a suitable alternative coating. This series is divided into subgroups of specific applications, i.e. support, tension, anchor, branch or underpass towers.
In material, it is divided into three types, completely lattice angular tower, completely lattice tubular tower or combined tower by angle and tube, this tower often stub legs by tube and bracing, gusset and web part by angle steel.
In general, this type tower was widely use in Asian countries, or even some European or other regions. We are professional manufacturer for this type of steel tower. ‘MEGATRO had professional QA &QC team to control quality and execute strict QC & QC plan as per client requirements. MEGATRO is one of the few manufactures who assemble a face of 110KV overhead transmission line steel tower. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies.

After fabrication all 110KV overhead transmission line steel tower are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers. Even we take secondary finish for client again, which as duplex surface treatment. The duplex coating applied in our own paint shop.
Duplex surface treatment involves sand-blasting to remove 5-10 microns of the 70-150 micron thick hot dip galvanization coating. This removes any contaminants and roughens the surface.

Read More