Power Distribution Equipment

1. Home
2. Products
3. Electronic & Electrical
4. Power Distribution Equipment

Share us

230KV suspension tower

MGP-ST230

Send Inquiry

Description

Product Description
230KV SUSPENSION STEEL TOWER
In an electric power transmission line, a suspension tower is where the conductors are simply suspended from the tower, the mechanical tension being the same on each side. In this case, the tower is supposed to carry a downward force, and a lateral force, but not a longitudinal force.
These may have, for each conductor, an insulator string hanging down from the tower, or two strings making a & quot;V& quot; shape. In either case, sometimes several insulator strings are used in parallel to give higher mechanical strength. These are used where a transmission line continues in a straight line, or turns through a small angle. In other cases, a tension tower (C or D Towers) is used.

MEGATRO supplied too many 230KV suspension tower to overseas clients, which including many types, such as self-supporting or guyed type. MEGATRO had professional QA &QC team to control quality and execute strict QC & QC plan as per client requirements and fit client design or other technical data. MEGATRO is one of the few manufactures who assemble a face of 230KV overhead transmission line steel tower. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies.

After fabrication all 230KV overhead suspension tower are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers.

MEGATRO& acute;s 230KV overhead suspension tower systems can accommodate a variety of cross-arm. MEGATRO also offers a wide variety of accessories and mounts.

Read More