Machinery & Equipment
Description
1. Lance body composition: The oxygen lance furniture is composed of three concentric circular pipes. It integrates oxygen lance end with oxygen&water supply and drainage channel with lance tip spraying oxygen forming hollow-shape oxygen lance. Three concentric circular pipes are generally hot-rolling NO.20 seamless low-carbon steel pipe. As far as converter oxygen lance is concerned, inner pipe is the line for oxygen which flows from oxygen supply pipe at the end of lance to inner pipe blowing in the metal bath through nozzle.
2. The lance body connection:
a. The inner pipe and lance end have two ways of link: One is permanent joint with the flange; the other is gliding joint with the flange.
b. Connection between the inner pipe and nozzle is adopted with sliding connection of O-type rubber rings with welding is fixed.
c. Connection between the inner pipe and lance end is adopted with welding or flange-bolt permanent connection; The middle pipe is the partition board between inlet cooling water and outlet cooling water in the oxygen lance. Connection between the middle pipe and lance end is adopted with flange fixed welding,while Connection between the inner pipe and oxygen lance nozzle is adopted with intubation sliding connection. Cooling water enters the furniture from ring passageway in the outer pipe, middle pipe and inner pipe along the admitting pipe at the end of the lance, and drops to the nozzle’s guidance diversion board, pools in the die cavity and flows rapidly through end surface in die cavity, turns 180° and enters gap closure of outer pipe, and flows out through discharging tube.
Read More
Shandong chongsheng metallurgical oxygen lance co.,ltd
oxygen lances, oxygen lance nozzles,converters, electric furnace, electrode holders, tuyere, slag notch, copper components, copper casting, blast furnace
Address: No.5199 yingqian street,
weifang, Shandong
China,
Tel: 86-15964047343
Fax:
