Adhesives & Sealants
Narrow Particle Fiber Grade Titanium Dioxide High Chemical Stable For Textile Industry
AIA-1
Description
Fiber grade Titanium Dioxide for textile industry, Narrow Particle size,High chemical stablity
Specifications:
?
Liangjiang brand-titanium dioxide fiber grade, Using international common production methods, coating modification to the surface of titanium dioxide particles in the water tank, in order to reduce its photosensitivity and improve its dispersion.Well-distributed surface coating, stable performance, etc.Suitable for high quality polyester, high long fiber and chemical fiber masterbatch, etc ?
?
Main features:
?
By coating modification to the surface of titanium dioxide particles in the water tank, in order to reduce its photosensitivity and improve its dispersion.Well-distributed surface coating, stable performance, etc.
Applications: Suitable for high quality polyester, high long fiber and chemical fiber masterbatch, etc ?
?
Typical technical data sheet( standard: Q/VAIP-2010)
?
- - - -
Index | ?????? JAPAN TA-300 | LJ-A300 |
Tio2 content %(m/m) | ≥98 | 98.6 |
?ppm Fe | ≤50 | 20 |
Moisture %(m/m) | ≤0.4 | 0.2 |
PH | 6.5-7.5 | 6.9 |
water dispersibility %(m/m) | ≥95 | 98.8 |
(45 um )residue on sieve | ≤0.02 | 0.02 |
Loss on ignition %(m/m) | ≤0.3 | 0.24 |
? electrical resistivity Ω/cm | ≥7000 | 9800 |
?ba testing value of Filter performance | 3.0-4.0 | 2.9 |
10%TiO2-EGpenetration amount | ambient temperature | - | 100% |
heating test | - | 100% |
? Interface sedimentation test | No stratification | No stratification |
No sedimentation | No sedimentation |
good dispersibility | good dispersibility |
Color | L | ≥97 | 98.64 |
a | ≤-1.0±0.5 | -0.22 |
b | ≤0.5 | 0.26 |
- - - -
?
Transportation: Keep dry and protect from rain, Don’t load with the perishable products or damaged packing goods, Do ensure the product safety and clean packaging.
?
Storage: Do keep dry, ventilate and avoid light, It’s better to be in indoors or the place with awnings. Do keep the storage place clean, protect the goods from the sun, protected from moisture and rain. The time of validity is three years from the production date.If out of date, Pls do re-inspection.If qualified ,then use.
?
Description:
?
Titanium dioxide, another important application fields, Textile and chemical fibre industry as flatting agent.Generally, using anatase in fibers because of the more softness than rutile. Titanium dioxide fiber grade doesn’t need surface treatment. But using in some special products, to bring down the tio2 photochemical action, avoid fiber in the role of tio2 photocatalysis drop solution,
?
Titanium dioxide fiber grade have the basic features of white pigment, the special request for particle size, particle distribution, whitness, impurity contents and so on.
?
1. Liangjiang brand-Titanium dioxide fiber grade , the request for particle size and distribution.
?
※ Due to the visible light wavelength of 400-700 nm, the titanium dioxide particle size should select the range from 0.15 um to 0.35 um, so the chemical fiber extinction effect is best.
※ When the particle size is too big (more than 0.5 um), it will reduce the performance of titanium dioxide on the short wave scattering, which have effects in fiber.
※ If big particle size at the same time, it can make the filtering performance poor, easy to block spinneret, which affects harmfully on the spining.
※ Does (such as less than 0.1 um) when particle size is too small, the diffraction of light, the light will be through from around the particles, not reflection, will become transparent crystal particles, titanium dioxide extinction ability can be lost.
※ Does often requires more than 90% of the titanium pigment particle size should be less than 1-2 um, the most important thing is try to contain no more than 5 um coarse particles.
2. Liangjiang brand- Titanium dixoide?fiber grade, the requirements for dispersion.
Good dispersion in water, better dispersion in solution of ethylene glycol ,sodium thiocyanate solution and so on, not reacttion with these chemicals.
?
3. Liangjiang brand-Titanium dioxide fiber grade, the requirements for the purity.
Good whiteness,low impurities,so that guarantee the better appearance, better dispersion.
4. Liangjiang brand-Titanium dioxide fiber grade, the requirements for chemical stability.
Not reaction with the original fluid, When using, easily dispersed, deflocculat, no jam and abrasive wear pipeline, jet holes and wire cutting knife.After the extinction , not affect the strength of the fiber and spinning processing.
?
5. The refractive index contrast between white pigment and synthetic fiber:
?
- - - -
White pigment ? | refractive index | Synthetic fiber | refractive index |
Tio2( anatase) | 2.55 | Polyester | 1.725 |
Tio2(rutile) | 2.76 | polyacrylonitrile | 1.515 |
Barium sulfate | 1.64 | Acetate | 1.37 |
Zinc oxide | 2.02 | viscose | 1.546 |
antimony oxide | 2.19 | Ketone ammonia | 1.572 |
Zinc sulfide | 2.37 | Nylon-6 | 1.558 |
lithopone | 1.84 | Nylon-66 | 1.558 |
- - - -
?
Tio2, high opacity, One of the most basic characteristics of good white pigments. Opacity is caused by refractive index difference between pigments and the surrounding mediums.
When refractive index of pigments and the refractive index of binder the same, shows transparent; When refractive index of pigments is greater than the refractive index of blinder, it is opaque, the larger difference, the stronger opacity.
?
The sheet shows the refractive index of pigments is higher than of general white pigments,two times as the refractive index of common synthetic fiber, besides, small particle size, good dispersibility, stable chemical properties, so putting 0.2% to 0.5% tio2 into the synthetic fiber can reach the flatting effects.
?
6. The cost of tio2 using in fiber is about 1%, the using of tio2 fiber grade is not like of the coatings. Using in coatings, if not good whiteness, matching color to remedy. If bad fitness, grinding repeatedly. If the bad quality of tio2 as Flatness, it will immediately cause the filter at a slower pace, and blockage of the jet hole, broken wires, hair silk, bad appearances of the fibers and so on. Liangjiang brand- titanium dixoide fiber grade, fine particles, almost no coarse particle, narrow particle size distribution and uniform, good dispersibility, and less impurity content, When using, not wear pipe, nozzle and wire cutting knife;Chemical stability, heat resistance, good resistance to light easy dispersion in bulk, fiber, and scattered and good stability, small filter resistance;After the extinction , not affects the strength of the fiber and spinning processing, once the sample passes the test, we can ensure the quality stability.
?
we aspires to be the supplier of ?the world& acute;s leading chemical raw materials, show our value of the products made in China!
Read More
Previous
Special Rutile White Titanium Dioxide Micronized , Titanium Dioxide Pigment ElNECS No. 236-675-5...
Shanghai Liangjiang Titanium White Product Co., Ltd.
Chloride Process Titanium Dioxide,Rutile Titanium Dioxide,Anatase Titanium Dioxide
Address: Room 302, Building No.8,
Shanghai, Shanghai
China, 200000
Tel: 86-21-69985235
Fax: 86-21-39565974
