Wires, Cables & Cable Assemblies
ER14505S High Voltage Lithium Battery 3.6V For Float Meter / Well Pressure Meters
ER14505S
Description
ER14505S High Voltage Lithium Battery 3.6V For Float Meter / Well Pressure Meters
?
?
?
- - - -
International Standard | AA | Nominal Capacity(mAh) | 1600 |
Max Size(mm) | Φ14.5×50.5 | Standard Discharge Current(mA) | / |
Weight(g) | 20 | Max Continuous Current(mA) | 20 |
Nominal Voltage(V) | 3.6 | Max Pulse Current(mA) | 100 ? |
- - - -
?
?
1. ?Battery Characteristic?
?
# High and Stable Voltage
The rated voltage of the single battery is 3.6V, high temperature load voltage from 3.4 V to 3.6 V
?
The discharge curve smoothly
# Wide Operating Temperature Range
Regular working temperature - 20 ℃ ~ + 150 ℃, special design can be up to + 200 ℃
# Long Shelf Life
Store at room temperature can reach more than 10 years
?
2. Main Applications
?
# Oil & Gas
Well pressure meters in high temperature, float meter, logging while drilling (LWD), measure while drilling (MWD), etc.
# Autos
Tire Pressure Monitoring System (TPMS), cylinder inspection device
# Geothermy
Temperature detector
# Military use and other applications in high temperature
?
3. FAQS of General Safety Instructions
?
# How about the storage environment of the battery?
?
The battery should be kept as dryly as possible when they are in storage.
?
# What kind of case do we need to stop using the battery?
?
We need to stop using the battery when the abnormal heat release or leakage occurs.
?
# What is the first step when you would like to use our battery?
?
The manual should be read before the battery is used.
?
# What is the effect of the signs + and - on the battery?
?
You need to follow the signs + and - on the batteries and make sure not to reverse. If batteries are wrongly used, they will be hot very fast and can lead the gas and other toxic materials leakage.
?
# What can& acute;t you do to the batteries?
?
The batteries are able to be deformed or drilled into or damaged because the toxic materials or gas leakage may lead a big rupture.
?
# Can the batteries be mixed to use on different electrochemical system, grades or brands?
?
When changing batteries be aware that batteries of different electrochemical system, grades, or brands should be not mixed. If different batteries are used or in case of using old and new batteries together this can discharge batteries due to different voltage or capacity. This can cause toxic material or gas leakage and/or violent rupture.
?
Read More
HCB Battery Co., Ltd
Lithium Primary Battery,Li-SOCl2 Battery,Li-MnO2 Battery
Address: No.1 Special Taizhong Avenue, Gaoqiao Industrial Park,
Wuhan, Hubei
China, 430000
Tel: 86-27-83248452
Fax: 86-27-83248455
