Storage Batteries & Secondary Batteries
Detachable Corrugated Side Silo Wall Panel Roll Forming Machine Manufacture Grain Bin
ZBR-S-1065
Description
Detachable Corrugated Side Silo Wall Panel Roll Forming Machine Manufacture Grain Bin
?
?
Specification
?
Features
?
1. Large capacity
One single-silo capacity is up to 17,000 tons with comprehensive configurations to meet customers’ different requirements.
?
2. High accuracy
Complete advanced processing equipment and technology are introduced from USA to effectively ensure working accuracy and reduce damage to galvanized layer.
?
3. Less residues
External installable stiffeners contribute to less grain residues on silo walls.
?
4. Detachable and movable
With standardized and modularized production, components and parts have a high standardization and good interchangeability, thus can be partially replaced or completely transferred.
?
Component
?
?
De coiler
?
Material width adjusting and guiding equipment
?
Roll former
?
Curving equipment
?
Cutting machine
?
Hydraulic control system
?
?
?
Technical process
?
?
?
Decoiling →Guiding→Cutting→Roll forming→Curving equipment
?
?
Technical parameter
?
?
- - - -
Suitable Raw Material | galvanized sheet, zinc aluminum sheet |
Material’s Strength | 310MPa |
Material’s Thickness | 1.2-4.5mm |
Forming Stations | 18 |
Max. Feeding Width | 1250mm |
Diameter of Roller’s Shaft | 120mm |
Producing Speed | 4-8m/min |
Material of Roller | GCr15 quenching HRC 58-62° |
Drive Mode | gearbox |
Main Power | about 180KW |
Electrical Control System | PLC frequency control |
Power Supply | AC 440V & 50HZ & 3PH |
Dimension(L*W*H) | 35m*4.5m*4.5m |
Total Weight | approx 70T |
- - - -
?
?
Basic parameters of finished product
1. Thickness of panel: 1mm zincalume sheeting G300.
2. Mechanical performance: yield strength 340MPa, tensile strength 470MPa.
3. coil width:900mm.
4. inner diameter of coil: φ460-550mm.
5. The width of finished profile width after formed: (As per required)
main configuration and technical proposal
(a) passive decoiler 10T
During normal processing, the decoiler works passively.
The capacity of this decoiler is around 10T, the width of coil is 900mm.
?
(b)?Level system: Five-roller leveler.
?
(c)?roll-former
1. The construction of roll-former: wall frame.
2. Transmission way: motor-chain drive-chain -main shaft
3. Roll-forming station: 18 stations
# # Main power: 15KW 415V 50HZ 3-phase Brake Motor
# Main reducer: Cycloidal Pinwheel Reduction Box: 33-43-15KW.
# Material of rollers: qualified 45# steel, galvanization treatment, to increase the smooth of roller surface and make sure of its service time and also avoid surface damage of the sheet.
# The shape of rollers is designed through German design software COPRA, and processed on the precision NC machine. The surface of rollers is polished
# The diameter of shaft for rollers: φ85, 45# steel quenched and tempered.
?
?
?
Read More
Wuxi Zhongborui Machinery Co. Ltd
Metal Roll Forming Machines,Silo Forming Machine,Cold Roll Forming Machine
Address: No. 513, Jincheng (E) Road, Meicun Town, New District, Wuxi, 214112, China.,
Wuxi, Jiangsu
China, 214000
Tel: 86-510-66812720
Fax: 86-510-66812720
