Industrial Lighting
Description
Galvanometer Laser Engraving Machine for Denim, High Speed Laser System for Jeans
?
?
Brief?Introduction
Denim?laser engraving is catering to the demands of replacing traditional washing processes. With 3D dynamic large-format Galvo marking technology, this laser?system is specifically developed for Jeans?Denim?engraving. Equipped with circulation type material feeding processing technology, the system engraves patterns on specified positions during the process. Thereafter, the material automatically moves to the engraving area with the help of a conveyor.?
?
GOLDEN LASER - Denim Laser Engraving Machine on CISMA
?
Features of Laser?Engraving Machine for Denim
1.? ?This laser system is specially designed for Denim Jeans engraving, successfully replaced traditional processing.
2. ? Laser engraving is?energy-saving, eco-friendly, no pollution and strong personalized.
3. ??It can engrave a variety of personalized designs such as cat whiskers, Monkey wash, PP spray, hanging rub, ripped, sandblasting, snow wash, portrait and other effects with clear texture and never fade.
4.? ?Multi-station circulating conveyor.?While in the process, at the same time it also can load material with high productivity.
5.??This machine is equipped with 500W CO2 RF?laser and triaxial dynamic large-format Galvo system.?Low maintenance cost. Fully closed structure. Safe and reliable system.
?
?
Highlights of Laser?Engraving Machine for Denim
?
# Especially suitable for Denim Jeans laser wash processing
# Projection positioning engraving parts, processing more accurate
# Multi-station circulating conveyor, precisely aligning and feeding
# Working area:?900X900mm / 1200X1200mm
# 500W?/ 275W CO2 RF metal laser generator
# 3D dynamic large-format galvanometer marking technology
# Energy-saving
# Low maintenance
# Hermetic structure
# Low contamination
# Excellent suction effect
# High working efficiency
?
?
- - - -
ZJ(3D)-9090LD Denim Jeans Laser Engraving Machine Technical Parameter |
Laser Generator and Optic Parameters |
Laser Type | CO2 RF metal laser | Laser Power | 500W / 275W |
Laser Wavelength | 10.6 micro meters | Galvo effective area | 900mmX900mm |
Galvo Processing Speed | 0-20000mm/s?(defined as the process material and requirement) |
Positioning Accuracy | ±0.1mm |
Power Supply | AC380V ± 5%? 50Hz |
Software system |
Control software | Golden Laser original software |
Software Format | BMP, AI, DST, DXF, PLT, etc. |
Working table parameter |
Working table type | Conveyor mesh belt working table |
Extend feed table area | 1100mm width X 1500mm length |
Conveyor speed | 0-600 mm/s | Conveyor belt motor | Servo motor |
Auxiliary System |
Protection System | Full protection with optic part structure |
Motion System | Offline mode servo motor control system, 5” LCD screen |
Control System | Golden Laser III control card |
Cooling System | Constant temperature water chiller |
Exhaust System | Fixed Upper exhaust fans / Air blow fans |
- - - -
?
?
Laser?Engraving Machine for Denim Processing Flow
?
Feeding station with the projector → 3 axis dynamic galvanometer processing station → Loading station
?
? ????Feeding station with the projector: put the Jeans on the conveyor belt within the outline area of projector, then press the foot switch, the machine will be feeding.
? ? ??3 axis dynamic galvanometer processing station: After feeding stop, laser system automatically start to engrave the designed graphics pattern, and waiting for the next feeding signal.
? ? ??Loading station: The finished jeans loading through the conveyer belt and into container.
?
?
Denim Laser Engraving?Sample Pictures
Read More
Wuhan Golden Laser Co., Ltd.
Fabric Laser Cutting Machine,Laser Engraving Cutting Machine,Jeans Laser Engraving Machine
Address: Golden Laser Building. No.6 Shiqiao 1st Road,Jiang'an District,
Wuhan, Hubei
China, 430000
Tel: 86-158-71714482
Fax: 86-158-71714482
