Machinery Designing & Processing

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Machinery Designing & Processing

Share us

Fluidizer

DN60~DN600

Send Inquiry

Description

1. Fluidizer introduction:

Fluidizer is an assisting component to flow bulk materials in the process of discharging. It is installed under the material.When the air is blowed in it will increase its fluidity, prevent bridges to make materials be smoothly discharged.

Fluidizer is installed in many directions of the cone hopper, to help the material flow flexibly.

Fluidizers contain batch fluidizer, plate fluidizer, disc type fluidizer, etc. silo fluidizer is its main kind.

2. KRD fluidizer& acute;s design purpose:

Help dry powder product flow in a flat shape or cone shape silo.For the standard equipment, while installing,conditions should be neutral PH value and temperature be lower than 350 ° F (170 ° C). While the moisture is less than 12-15%, fluidizer has the best effect. Large particles, such as stones, feed, grain and aggregates, can not work with fluidizer. When granular inserted with each other, such as wood planer slice, broken plastic material or reinforced glass,fluidizer is also unable to achieve the ideal effect.

3. Installing requirement: at the 1/3-1/2 bottom of cone place do the air operations. Taper slope shall be at least for 45 °, in order to achieve the best effect. In curved surface and install the diameter must be more than 16 & quot;, to ensure proper seal (can undertake modification to apply to stricter requirements) conditions. The position of the first row fluidizer should be located with a distance 12 & quot;- 18& quot; with inlet. Each row should have sufficient number of devices to ensure 20-24 & quot;separation requirements. Laid down a row device shall be in position to obtain complete staggered coverage. The number of Fluidizer in higher Position can be increased.

Read More