Welding & Solders
Description
Labthink Newly Lanuched Heat Seal & Hot Tack Tester for Packaging Materials
?
i-Thermotek 2400 [Heat Seal & Hot Tack Tester] can be used for hot tack test of plastic films, composite films and other packaging materials as well it can be used to measure the heat seal strength of the test specimen rapidly and accurately within a specified period after heating and sealing procedures. Additionally the sealing parameters of the substrate materials of plastic film, flexible composite film, coated paper or other composite films can be determined with certain sealing speed, sealing pressure and at three different sealing temperatures in one single test.
?
Specifications
?
- - - -
? Sealing Temperature Room temperature~250 °C |
Sealing Pressure 0.05 MPa~0.7 MPa |
Dwell Time ≤99.9s |
Resolution ±0.1°C |
Accuracy ±2°C |
Temperature Gradient ≤20°C |
Sealing Area 55mm×10mm |
Number of Sealing Jaws 3+1Note1 |
Hot Tack Test Sealing Temperature Room Temperature~250°C |
Resolution ±0.1°C |
Accuracy ±1°C |
Dwell Time (Heat Seal) ≤99.9s |
Dwell Time (Hot Tack) ≤20s |
Sealing Pressure 0.05~0.7MPa |
Number of Sealing Jaws 1＋1Note2 |
Capacity Range 0~50N (Optional) |
Test Accuracy 1% FS |
Resolution 0.1N |
Specimen Width 15 mm or 25 mm or 25.4 mm |
Heat Seal Strength Capacity Range 0~50N (Optional) |
Test Accuracy 1% FS |
Resolution 0.1N |
Specimen Width 15 mm or 25 mm or 25.4 mm |
Speed 200mm/min,250mm/min,300mm/min (Customization is available) |
Stroke 78.5 mm |
Others Gas Supply Air (Outside of supply scope) |
Gas Supply Pressure 0.05~0.7MPa |
- - - -
?
Standards
?
Heat Seal & Hot Tack Tester conforms to multiple standards i.e. ASTM F1921, ASTM F2029, ASTM F88, QB/T2358 (ZBY 28004) and YBB 00122003.
?
Read More
Labthink Instruments Co, ltd
Tensile Testing Machine,Package Testing Equipment,Gas Permeability Tester
Address: 144 Wuyingshan Road, Jinan, P.R.China,
Jinan, shandong
China, 250031
Tel: 86-531-58702821
Fax: 86-531-85068566
