Electronics Designing & Processing
Description
?
?
?
YIHUA 1000B infrared BGA Rework Station ,Preheating station +hot air rework +soldering station +IR +Lamp
? Product Description
?
Feature
?
1. Using the new?SAMSUNG microcomputer processor PID?programmable temperature control technology and uses an infrared source and optics to target heat to individual components without dislodging other SMT parts by way of eddies air currents.
2. Adopt?infrared weld technology?which independent exploration, infrared penetration strength, components uniform heating, beyond the traditional hot air heating vowed to prevent blow off the IC surrounding small components.
3.?Technician focused infrared heat?is easy to target most component removal/replacement and re-work.
4. Infrared heat source bulbs are?long-lived, un-expensive and easily replaced.
5. Has bright delicate,?low voltage LED lighting, safety and energy conservation.
6.It has?External Sensor Temperature control mode, that is detected by the sensor IC surface temperature control temperature,?this function is good for freshman operation ,it’s safe way protect??components .
7.MountTechnology (SMT) components 15-35cm in size.
8. This machine has 540W heating system , widely to 120mm*120mm.
9.?Preheating plate color is black?,from the photics point of view, black color?easy to absorb heating, shorten the warm-up time.
10. Powerful human function design, with the following functions:
A.?Temperature correction function?: Correction of temperature range:-50°C~+50 °C(Infrared lamp analog value :580).
B.?Celsius / Fahrenheit temperature display function
11. This machine also have?hot air reworks and soldering iron function, if you have the device ,you can used for all of the components solder ,de-soldering ,preheating ,repair all components ,especially Micro BGA components.??
?
?
Technical data:
?
voltage? AC220V±10%
Max?power?consumption 1415W
??
Preheating station parts:
Max?power?consumption:540W?
Light-emitting?components:Far?infrared?heating?plate
Temperature?Range:50°C-300°C/122°F~572°F or 50?°C?~200?°C?/??122°F~488°F
Display?Type:LED
?Preheating?area:120*120mm
?
Infrared?lamp?part:
Max?power?consumption:150W
Light-emitting?components:Infrared?emission?lamp
Temperature?Range:100°C-350°C/212°F~662°F
Temperature?Stability:±1°C
Display?Type:LED
Effective?irradiation?area:35*35mm
Come with 2 lens cup, you can be choice two of ?lens cup from ?28mm?/ 38mm /48mm.
?
Soldering?station?part:
Max?power?consumption:75W
Heating?components:imported?heater
Temperature?Range:200°C-480°C/392°F~896°F
Temperature?Stability:±1°C(statics)?
Tip?of?ground?voltage:<2mV
Tip?ground?impedance:<2?ohm
Display?Type:LED?Display
Handle?cable?length;≥100cm
?
Hot?Air?Reworks?part:
Max?power?consumption:700W
Heating?components:Skeleton-type?ceramic?heater
Airflow?type:Brushless?fan?spiral?wind?
Air?Flow:≤130?L/min
Temperature?Range:100°C-480°C/212°F~896°F
Temperature?Stability:±1°C(statics)?
Display?Type:LED
Handle?cable?length:≥100cm
??
Operation infrared?BGA rework station?NOTICE:
1.Repair circuit boards required precautions and necessary protective measures:
1)To ensure that both sides of the circuit board preheat zone without fusible explosive flammable components,like:Plastic,Display,Phone camera,LED,Electrolytic capacitors.
2)Ensure that no combustible fusible explosive components in Infrared light can shine on the area, If you can not avoid,Must use reflective paper keep out that. like:Plastic,Display,Phone camera,LED,Electrolytic capacitors.
2.According to IC size, use a suitable diameter lamp cup(lamp cup size larger than IC size);Install lights Cup minimize the distance between lamp and IC,to facilitates heating.
3. Ensure that the working environment is no greater airflow to prevent heat loss,well sheltered measures when necessary.
4. Apply solder paste to the IC before the de-soldering,also you can early preheat then Apply solder paste,Especially BGA package IC,should be early preheat then apply solder paste,the can make solder paste penetrate into the bottom of the IC.
5.?Wear heat protective gloves and goggles. Place the visor, good shading measures to protect the eyes.
?6. Turn on the Infrared light power,Set the temperature to about 280°C.Make the appropriate adjustments based on the size of the IC and circuit board. IC by infrared light irradiation will be rapidly warming (generally 1 to 3 minutes) .
7. Just started using this product, it is best to try to use the abandoned circuit board rework a few times. and so familiar with the use of this product ,then carry out normal maintenance work.
?
Usage
1).?Suitable?for?de-soldering?and?soldering?BGA,?SOIC,?CHIP,?QFP,?PLCC?package?SMD?IC,
Particularly?suitable?for?desoldering?BGA?module,?computer?motherboard?north?and?south?bridge,?
all?kinds?of?mobile?phone?motherboard SMT?IC?and?LED?lights.
2).?Shrinking,?Paint?drying,?adhesive?removal,?thawing,?warming,?Plastic?welding?etc.
?
These are 220V units you may need a transformer to use the machine in your country. we also do accept special orders for?110V? / 230V/ 240V units?
? Our Services
?
Our warranty
*Credit Safeguard
GuangZhou YiHua Electronic Equipments Co,. Ltd? was signed a contract with Alibaba and? paid a large deposit, make buyers fee l comfortable buying
*Factory advantage
Factory D&R / production/ sales/ and sales service together.
Manufactory? sell directly,the goods are in plenty supply,delivery date fast,good compete price You could arrange to ship the goods by your self , or? ask we help you arrange to ship. If? we help you arrange to ship. Before quote the shipping freight, we need to know which model and quantity you are asking. We will according your detail address, order model and quantity to advise? you ship by sea? or, by air ,or by Express. As usual, we are using HongKong DHL to ship the small order..
*Delivery date
As usual, 1~16pcs are 1~3 days will ship out . Made in time, fresh from the assembly line.
Over 100~over500pcs are 20days? will ship out. Over 1000pcs are 30days .
If the material not enough or we have some customer? queue up our products before you,
we will discuss with you the shipping date. If you want the delivery date faster than that day, please inquiry us, we will try to do it as your request.
*Warranty policy
One Years warranty
As usual, the shipping fee are high. if return China to repair are not worth the money. So we could support technology and give you the spare parts along with the product .
Note: warranty does not cover wearing parts:, for example :iron heater, gun heater ,iron tips.
*Products? discount
as usual we quote three price for each model :sample price, over 60pcs price, over 500pcs price.
Those price are calculate our produce cost, as you know big order are less margin to sell. we hope take win-win business with both.
*Warm-heart? note
1.If products upgrade or quality improve to change the technique parameter, the factory will not further notice.
2.If the customer haven& acute;t special request, the product in accordance with factory& acute;s setting quality standards to produce
Read More
Guangzhou Yihua Electronic Equipment Co., Ltd.
Hot-Air Soldering Station,2 In 1 Soldering Station,3 In 1 Soldering Station
Address: No.7, ShaJing East Road, YongXing industrial estate, LongGui, Guangzhou ,China,
Guangzhou, Guangdong
China, 510000
Tel: 86-02-87470526
Fax: 86-02-87470261