Rubber & Products
Description
Electronic Potting Silicone Compound
Product Feature
HY 9055 is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate),PP,ABS,PVC, etc. and metal materials.
Typical Application
HY 9055 could be applied to
- high powered electronics
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
TECHNICAL GUIDELINES
1. Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2.Mixing Ratio: part A: part B = 1:1
3. Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.
4. Pls note that the thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80 to 100 centigrade, the silicone will cure in 15 minutes; while in 25 centigrade room temperature, the silicone will cure around 8 hours.
Read More
Hong Kong Hong Ye Chem Limited.
silicone rubber,liquid silicone rubber,rtv silicone
Address: Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang District, Shenzhen City, Guangdong Province, China,
Shenzhen, Guangdong
China, 518117
Tel: 0086-1755-89212382
Fax:
