Materials Handling
Description
servo power saving Large Injection Molding Machine 4000Ton model M430
?
Detailed Product Description
?
Better molding stability
Compared with conventional injection molding machines , repeatability is greatly improved to servo motor closeloop control.
?
More?fast?cycle
valve?panel?design?in?bigger?hole?with?bigger?oil?pipe.Oil?go?though?the?valve?more?fast?flow?and?the?Machine?action?more?goes?more?faster?in?mould?open?and?ejector?process.?
?
Mould?thickness?fully-automatic?adjustment?by?sensor,wheel?and?moto,more?accurate
?
Install?screw?rotation?speed?sensor?,can?see?the?real?material?charging?status?in?the?controller.
servo
?
COMPONENT
?
- - - -
COMPONENT | BRAND&ORIGINAL | ? |
hydraulic?system | Servo |
hydraulic?motor | INTERMOT-ITALY-CHINA | ● |
servo?motor?control?system | HUICHUAN/PHASE-CHINA | ● |
hydraulic?pump | fixed?Pump | VICKERS?OR?YUKEN | / |
gear?pump | SUMITOMO-JAPAN | ● |
hydraulic?direction?valve | NORTHMAN-TAIWAN | ● |
propotional?flow?control?valve&propotiona l?pressure?control?valve | HNC-TAIWAN?FOR?BIG?MACHINE, SMALL?MACHINE?USE?DONGFENG-CHINA | / |
mould?adjust?hydraulic?motor | INTERMOT-CHINA? | ● |
hydraulic?safety?valve | NORTHMAN-TAIWAN | ?● |
electric?system | ? |
computer/controller | TECHMATION-TAIWAN | ● |
relay | SCHNEIDER-GERMANY | ● |
main?switch | LS-KOREA | ● |
linear?transducer | GEFRAN-ITALY | ● |
limited?switch | PANASONIC-JAPAN | ● |
breaker | CHENTAI-CHINA | ?● |
electric?motor | ZHONGDA-CHINA | / |
others | ? |
?High?pressure?hydraulic?pipe | GOODYEAR-USA | ● |
seals | VALQUA-JAPAN | ● |
pressure?meter | Tecsis-USA | ● |
automatic?lubrication? | SL-CHINA | ● |
screw? | JINGXING-CHINA?38CrMoAlA | ● |
- - - -
?
?
?SPECIFICATION
?
- - - -
MODEL | M430 |
A | B | C | D |
????????????????????? INJECTION? UNIT | |
SCREW? DIAMETER | mm | 65 | 70 | 75 | 80 |
SCREW? L/D? RATIO | L/D | 24 | 22 | 20 | 19.2 |
SHOT? VOLUME(THEORETICAL) | ? | 1261 | 1462 | 1679 | 1910 |
INJECTION? WEIGHT(PS) | g | 1160 | 1345 | 1544 | 1757 |
INJECTION? PRESSURE | Mpa | 194 | 168 | 146 | 128 |
INJECTION? RATE | g/sec | 206 | 238 | 274 | 312 |
SCREW? SPEED | rpm | 150 |
?????? ???????CLAMPING UNIT | |
CLAMP? TONNAGE | KN | 4300 |
TOGGLE? STROKE | mm | 700 |
MIN.MOLD? HEIGHT | mm | 280 |
MAX.MOLD? HEIGHT | mm | 780 |
SPACE? BETWEEN? TIE? BARS | mm | 750X710 |
?EJECTOR? TONNAGE | KN | 100 |
EJECTOR? STROKE | mm | 200 |
?EJECTOR? NUMBER | PC | 13 |
?????????????????????????????? OTHERS | |
MAX.PUMP? PRESSURE? | Mpa | 16 |
HEATER? POWER | KW | 23.5 |
PUMP MOTOR? POWER | KW | 37 |
?OIL? TANK CUBAGE | L | 630 |
?MACHINE? DIMENSION(LxWxH) | M | 7.5X1.65X2.35 |
?MACHINE? WEIGHT | T | 13.2 |
- - - -
Read More
VAINO INTERNATIONAL LIMITED
HDPE Blow Molding Machine,Extrusion Blow Molding Machine,Automatic Blow Molding Machine
Address: Room1315,B# Ningbo Chamber Of Commerce Building,No.588 Tiantong South Road,Yinzhou District,Ningbo,China,
Ningbo, Zhejiang
China, 315000
Tel: 86-574-88054805
Fax: 86-574-88054565
