Industrial Supplies Agents
Description
high performance saving energy Plastic Injection Moulding Machinery with M430
?
Detailed Product Description
? ??
Enviromental protection-high energy saving
High performance energy saving result realized the reduction of cost
Not only save energy, but also realized the precise speed and pressure control
High efficiency, lower oil temperature ,make oil talk much smaller, extend the use of hydraulic oil and elements
?
HIGH ENERGY SAVINGS
Under normal operating conditions,compared with conventional hydraulic injection molding machines,energy saving of 20-80% can be achieved.
?
MOLDING STABILITY
Compared with conventional injection molding machines,repeatability is greatly improved due to ervo motor closed-loop control
?
QUICK RESPONSE
Featuring a dynamic servo motor with a response time of only 0.05sec
?
QUIET OPERATION
Machine runs ?much lower noise levels, particularly in low speed applications
?
RELIABLE HOLDING PRESSURE
Compared with traditional hydraulic machine,the holding pressure is more stable and does not have limitation
?
BETTER OIL TEMPERATRURE STABILITY
The servo system only delivers hydraulic oil as it is needed for the various functions,This prevents unnecessary generation of heat and substantially reduces oil cooling requirements.
?
?
COMPONENT
?
- - - -
COMPONENT | BRAND&ORIGINAL | ? |
hydraulic?system | Servo |
hydraulic?motor | INTERMOT-ITALY-CHINA | ● |
servo?motor?control?system | HUICHUAN/PHASE-CHINA | ● |
hydraulic?pump | fixed?Pump | VICKERS?OR?YUKEN | / |
gear?pump | SUMITOMO-JAPAN | ● |
hydraulic?direction?valve | NORTHMAN-TAIWAN | ● |
propotional?flow?control?valve&propotiona l?pressure?control?valve | HNC-TAIWAN?FOR?BIG?MACHINE, SMALL?MACHINE?USE?DONGFENG-CHINA | / |
mould?adjust?hydraulic?motor | INTERMOT-CHINA? | ● |
hydraulic?safety?valve | NORTHMAN-TAIWAN | ?● |
electric?system | ? |
computer/controller | TECHMATION-TAIWAN | ● |
relay | SCHNEIDER-GERMANY | ● |
main?switch | LS-KOREA | ● |
linear?transducer | GEFRAN-ITALY | ● |
limited?switch | PANASONIC-JAPAN | ● |
breaker | CHENTAI-CHINA | ?● |
electric?motor | ZHONGDA-CHINA | / |
others | ? |
?High?pressure?hydraulic?pipe | GOODYEAR-USA | ● |
seals | VALQUA-JAPAN | ● |
pressure?meter | Tecsis-USA | ● |
automatic?lubrication? | SL-CHINA | ● |
screw? | JINGXING-CHINA?38CrMoAlA | ● |
- - - -
?
?
?SPECIFICATION
- - - -
MODEL | M430 |
A | B | C | D |
????????????????????? INJECTION? UNIT | |
SCREW? DIAMETER | mm | 65 | 70 | 75 | 80 |
SCREW? L/D? RATIO | L/D | 24 | 22 | 20 | 19.2 |
SHOT? VOLUME(THEORETICAL) | ? | 1261 | 1462 | 1679 | 1910 |
INJECTION? WEIGHT(PS) | g | 1160 | 1345 | 1544 | 1757 |
INJECTION? PRESSURE | Mpa | 194 | 168 | 146 | 128 |
INJECTION? RATE | g/sec | 206 | 238 | 274 | 312 |
SCREW? SPEED | rpm | 150 |
?????? ???????CLAMPING UNIT | |
CLAMP? TONNAGE | KN | 4300 |
TOGGLE? STROKE | mm | 700 |
MIN.MOLD? HEIGHT | mm | 280 |
MAX.MOLD? HEIGHT | mm | 780 |
SPACE? BETWEEN? TIE? BARS | mm | 750X710 |
?EJECTOR? TONNAGE | KN | 100 |
EJECTOR? STROKE | mm | 200 |
?EJECTOR? NUMBER | PC | 13 |
?????????????????????????????? OTHERS | |
MAX.PUMP? PRESSURE? | Mpa | 16 |
HEATER? POWER | KW | 23.5 |
PUMP MOTOR? POWER | KW | 37 |
?OIL? TANK CUBAGE | L | 630 |
?MACHINE? DIMENSION(LxWxH) | M | 7.5X1.65X2.35 |
?MACHINE? WEIGHT | T | 13.2 |
- - - -
?
Selling?points
?
Better molding stability
Compared with conventional injection molding machines , repeatability is greatly improved to servo motor closeloop control.
More?fast?cycle
valve?panel?design?in?bigger?hole?with?bigger?oil?pipe.Oil?go?though?the?valve?more?fast?flow?and?the?Machine?action?more?goes?more?faster?in?mould?open?and?ejector?process.?
Mould?thickness?fully-automatic?adjustment?by?sensor,wheel?and?moto,more?accurate
Install?screw?rotation?speed?sensor?,can?see?the?real?material?charging?status?in?the?controller.
?
platen drawing
?
Read More
VAINO INTERNATIONAL LIMITED
HDPE Blow Molding Machine,Extrusion Blow Molding Machine,Automatic Blow Molding Machine
Address: Room1315,B# Ningbo Chamber Of Commerce Building,No.588 Tiantong South Road,Yinzhou District,Ningbo,China,
Ningbo, Zhejiang
China, 315000
Tel: 86-574-88054805
Fax: 86-574-88054565
