Wire Mesh

1. Home
2. Products
3. Minerals & Metallurgy
4. Wire Mesh

Share us

Pad mist eliminator or mist eliminator mesh pads with applications

1

Send Inquiry

Description

Pad Mist Eliminator or mesh mist eliminator pads
Has support grids at the top and bottom. Pad mist eliminator applications require special consideration to assure the removal of entrained moisture in the effluent gas stream.
Woven wire mesh pad mist eliminator
The woven wire mesh pad mist eliminator provides gas-liquid separation at lower mist eliminator cost. However, due to lower gas velocity limitations than vanes it requires larger more costly separator vessels to achieve effective separation.
Mist eliminator pads materials
Mist Eliminator Pads Mesh and grids may be made from most metals and plastics i.e. SS-304, 304L, 316, 316L, 430, Monel, Nickel, Copper, P.T.F.E. (Teflon), H.D.P.E., P.P. etc. and other metals, alloys or plastic which can be drawn or extruded.
Mist eliminator pads are made up from knitted materials with interlocking asymmetrical loops of metal or plastic with typical wire diameters being 0.1 – 0.3mm. By careful choice of wire diameter, Knitted wire products have produced knitted mesh mist eliminators with extremely high free volumes (typically 98-99%) along with very high removal efficiencies and low pressure drop.
Separations & Mass-Transfer Products Division has produced high efficiency knitted wire mesh mist eliminators for free water droplet removal from vapor streams up to 99% removal of droplets 3 micron and larger. Mist eliminator drain roles greatly improve glycol and amine solvent loss reduction. This role feature may be added or specified on any standard mesh pad application for increased droplet removal efficiency performance and overall capacity.
Pad mist eliminator specifications:

Read More