Electronic Signs

1. Home
2. Products
3. Electronic & Electrical
4. Electronic Signs

Share us

2000kg 10x6 Galvanized Box Trailer With Brake / 2.1mm Folded Checker Plate

10x6

Send Inquiry

Description

2000kg 10x6 Galvanized Tandem Trailer With Brake / 2.1mm Folded Checker Plate


Applications:

We always have different types and sizes of:Tradesman Top Trailers,Box Trailers,Cage Trailers,Bike Trailers, Car Carriers, Enclosed Trailers, Tandem Trailers, Water Carting Trailers, Lawn Mowing Trailers, Custom Build Trailers in stock, Most of them are ready to go.

?

Specifications:
?

- - - -
BODY/FLOOR | 350MM Sides 2 piece 2.1mm Rolled Checker Plate Tub |
TAILGATES | 2.1mm Folded Checker Plate, with tie rails |
MUDGARD | 2.1mm Checker Plate, 250mm Wide 4 Fold |
DEFLECTION RAILS | 50x50 Angle on each side |
SIDE TIE RAILS | 27x2mm Pipe Round Full Length (extra reinforced) |
COUPLING | 50mm Mechanical over Ride Plunger Type / Hand Brake |
SUSPENSION | Rocker Roller Load Sharing Springs |
AXLES/BRAKES | 40mm Square Solid/ Mechanical Disc |
BRAKES | Mechanical Disc/Galvanised Calliper’s True Cable Hand Brake |
HUBS/FORD | LM A-type PCD 114.3, 5 x 1/2& quot; Studs (Stud Centre 66.6mm) |
BEARINGS | Bearing A-type Inner Large LM67048 Outer Small LM11949 |
RIMS | NEW Sunraysia Type 14x5.5& quot; CB 84mm PCD 114.3 (FORD) |
TYRES | NEW 185R14C |
CHASSIS | ALL50x50 RHS |
DRAW BAR | 100x50x3mm RHS V-type, with spare wheel holder |
SAFETY CHAIN | 10mm Rated chain 450mm Long |
LIGHTS | LED Multi volt 12-24v, With Side Clearance Lights 7-Pin plug |
- - - -

?
?
Description:
?
STANDARD FEATURES
· Rolled C/Plate floor with 350mm High Side
· Front & rear opening tailgates with tie rails
· C/Plate Tailgates & Mudguards
· Full length side tie rails with Deflection Rails
· Swing handles to secure the tailgates
· V- type draw bar made from square RHS tube
· Spare Wheel Holder on Draw Bar
· Lockable plunger coupling
· LED ADR approved lights and reflectors/ Light protectors
· Mudflaps to comply with Australian standards
· New wheels (NOTE NOT SECOND HAND)
· Plug holder fitted on draw bar
· Mechanical disk brakes /Cable hand brake fitted
· Tube holders in each corner for fitting cage or H/frame
?

How to get a good quality trailer:
1) Ask Trailer Supplier Send Quality Report For Steel. Best Steel Brand In China Is Bao Steel.SWT Trailer Use Bao Steel All The Time.
2) Ask Trailer Supplier Offer Drawing For Trailer Chassis. It Will Be Easy For You To Know What Thickness And What Type Material They Used On Chassis. Mostly RHS Chassis Is More Stronger Than Angle Chassis. Also Check How Many PCS Cross Bar On Chassis..The More Cross Bar On Chassis The More Stronger.
3) All Sizes Trailers Chassis From SWT Trailer Are 300mm Apart With A 50x50 RHS Bar.
4) Check The Trailer Parts With Certification Or Not. Trailer Wheel. Trailer Lights. Trailer Coupling. Trailer Chain. And Etc Have To Be With Certification
5) Check The Axle And See If The Axle Is Solid Or Hollow Axle. Solid Axle Is 100% Stronger Than Hollow Axle. Hollow Axle With Risk For Braking If People Overload Goods On Trailer.
6) Check The Trailer Is Bolted Design Or Fully Welded Design. Bolted Design Trailer Sides All Use Bolts Bolt On Trailer Chassis. Fully Welded Trailer Sides, Floor, Chassis All Weld Together. It Is A Whole Part.
SWT Trailers All Fully Welded Design.
7) Mostly Bolted Design Trailer Side And Floor Use 1.18mm Ribbed Zinc Plate.
?
?

Read More