Raw Fabrics
Description
Description of Glass Fiber Rove
Glass fiber rove for winding is suitable for reinforcing unsaturated polyester resin, vinyl resin, epoxy resin, polyurethane resin etc.
Characteristics of Glass Fiber Rove:
Uniform tension, speed and fully penetration, less hairiness, excellent mechanical properties. High hardness, low static, good dispersibility, good short cut ability.
Application of Glass Fiber Rove
Aerospace, transportation, petroleum and natural gas pipeline, the roof of the vehicle, chemical equipment etc.
Technical Parameters
Model Type Filament Diameter(μm) Linear Density(tex) Loss On Lgnition( Moiture Content Sizing Code Application
WXS# E-Glass 8, 9 22, 33 0.01% 25% KH560 weave
WCS# E-Glass 11-24 300,1200,2400,4800,9600 0.55±0.15% ≤0.1% 911 winding/pultrusion/ weave
ZCS# C-Glass 11-24 300、1200、2400、4800、9600 0.55±0.20% ≤0.2% 911 winding/pultrusion/ weave
GCS# A-Glass 11-24 300、1200、2400、4800、9600 6-7％ / winding/pultrusion/ weave
WDQCS# E-Glass 12-13 2400 0.50±0.15% ≤0.15% KH-512 winding/pultrusion/ weave
SGS# E-Glass 11-13 2400-4800 0.55±0.15% ≤0.1% 911 winding/pultrusion/ weave
Package
Each yarn group can be packed with heat shrink film or stretch film, and then placed in trays or boxes, each tray 48 or 64 yarn group, each yarn 15-18kg. According to the requirements of users can increase the weight of yarn group, but no more than 24kg.It can also be the packed into cartons, one roll each box.
Container capacity: 1 x 20 foot container can hold 10 large and 10 small tray, net weight is about 20 tons
Read More
Previous
pad printing silicone rubber...
SHENZHEN HONG YE CHEMICAL PLANT CO; LTD.
silicon rubber,mold silicon rubber,liquid silicon rubber,pad printing silicon rubber
Address: Building A, No.3, Hongling First Road,,
Shenzhen, Guang Dong
China, 518117
Tel: 8675589212365
Fax: 86075589948030
