Electronics Agents
Description
?
USB-Digital Laser Marking Card/controller for co2/YAG laser maker
?
Quick?Detail:
?
Digital?laser?engraving?card?can?control?co2?or?yag?laser?machine?for?laser?marking?and?laser
?engraving?.Software?EZCAD?Support?CO2,YAG,IPG,SPI?and?so?on?laser?type.
?
?
Description:
?
# Galvo?control?signal?is?digital,?which?can?be?connect?to?most?scan?head?directly.
# on-the-fly?marking?feature.?A?encoder?can?be?used?to?surveillance?the?pipeline?speed real-timely.
# Multiple?system?function.?One?computer?can?control?up?to?8?control?board?to?mark different ? pattern?simultaneously?
# Extension?axis(step?motor?or?sever?motor):?two?set?of?direction/pulse?signal?can?be?used?to ?control?2?step(server)??motors.
# 16?general?input?signals(TTL?compatible):?In0-In13,?XORG0(IN14),?YORG0(IN15).
# 14 general input signals(TTL compatible): Out0-7 coming out of Con5. Out813 coming out of? CON2. Out0 - 3 ,out8 and out13 are TTL outptsOut4-7 can be configured as OC output or TTL output by jumpers. Out 912 are OC outputs.
# ReMark(Repeat?marking?signal):?in?the?case?of?high?speed?marking?of?a?same?pattern, a?foot?pedal?can?be?connected?to?this?pin.?If?some?variables?are?in?the?pattern?or?the pattern?is?too?big?for?the?cache?in?board,?the?foot?pedal?can?be?only?connect?to?general input?pins.
?
? ? ? ? ? ? ? ? ??
Applicable?scope:
?
·Laser?Marking
·Laser?Engraving
·Cutting?cloth
·Cutting?paper
?
?
Function:
# Fly?marking?
# Ruler?mark
# 4?kinds?of?Hatch
# Two?axis?control
# Multi-head?
# Vision?mark
?
Specifications:
?
- - - -
FEATURE |
14?general?output?signals(TTL?compatible):?Out0-7?coming?out?of?Con5.?Out813?coming?out?of??CON2. Out0?-?3?,out8?and?out13?are?TTL?outputs.?Out4-7?can?be?configured?as?OC?output?or?TTL?output?by? jumpers.?Out?9-12?are?OC?outputs. |
ReMark(Repeat?marking?signal):?in?the?case?of?high?speed?marking?of?a?same?pattern,?a?foot?pedal?can? be?connected?to?this?pin.?If?some?variables?are?in?the?pattern?or?the?pattern?is?too?big?for?the?cache?in? board,?the?foot?pedal?can?be?only?connect?to?general?input?pins. |
Laser?signal:?we?provide?both?high?level?effective?and?low?level?effective?signals. |
PWM?signal:?both?differential?and?TTL?signal?is?provided. |
A?specified?red?light?pointer?signal?is?now?added. |
Two?analog?signal?that?control?power/frequency?is?now?added. |
Using?USB2.0?specifications. |
- - - -
?
?
- - - -
CARD?PARAMETER |
16?general?input?signals(TTL?compatible) |
14?general?output?signals(TTL?compatible) |
Using?USB2.0?specifications |
- - - -
?
?
?
- - - -
Laser?Safety |
This?product?is?intended?for?controlling?a?laser?scan?system.?Therefore?all?relevant?laser?safety?directives? must?be?known?and?applied?before?installation?and?operation.?The?customer?is?solely?responsible?for ?ensuring?the?laser?safety?of?the?entire?system. |
All?applicable?laser?safety?directives?must?be?adhered?to.?Safety?regulation?may?differ?from?country?to country.?It?is?the?responsibility?of?the?customer?to?comply?with?all?local?regulations. |
Please?observe?all?laser?safety?instructions?as?described?in?you?scan?head?or?scan?module?manual, and?this?manual. |
Always?turn?on?the?power?of?this?product?and?the?power?supply?for?the?scan?head?first?before?turning? on?the?laser.?Otherwise?there?is?the?danger?of?uncontrolled?deflection?of?the?laser?beam. We?recommend?the?use?of?a?shutter?to?prevent?uncontrolled?emission?of?laser?radiation. |
- - - -
?
?
- - - -
ACCESSORIES |
DB9?male/female?sockets | USB?cable?(1.5m) |
DB15?male/female?sockets | DB25?cable?(1.5m) |
DB25?male/female?sockets | CD |
- - - -
?
?
? ? ? ? ??
?
Competitive?Advantage:
?
Work?stable,operation?simple,easy?to?learn,famous?software?EZCAD,low?cost,USB?connection.
?
Read More
Beijing JCZ Technology Co. Ltd
EZCAD Laser Marking Software,Laser Engraving Software,3D Laser Engraving System
Address: M3 building, No1 East Road of Jiuxianqiao, Chaoyang district, Beijing China,
Beijing, Beijing
China, 100000
Tel: 86-010-64426995
Fax: 86-010-64426995
