Air Treatment & Conditioning
Description
Ball Nose Long Neck End Mill Carbide Tapered End Mills CE / TUV Approved
?
Specifications:
?
- - - -
Model?NO. | Diameter/D1 | Flute?Length/L1 | E.L./L2 | O.A.L/L3 | Shank?Dia/D2 |
JTR2004-2 | R0.2 | 0.8 | 2 | 50 | 4 |
JTR2004-4 | R0.2 | 0.8 | 4 | 50 | 4 |
JTR2005-2 | R0.25 | 1 | 2 | 50 | 4 |
JTR2005-4 | R0.25 | 1 | 4 | 50 | 4 |
JTR2005-6 | R0.25 | 1 | 6 | 50 | 4 |
JTR2006-2 | R0.3 | 1.2 | 2 | 50 | 4 |
JTR2006-4 | R0.3 | 1.2 | 4 | 50 | 4 |
JTR2006-6 | R0.3 | 1.2 | 6 | 50 | 4 |
JTR2006-8 | R0.3 | 1.2 | 8 | 50 | 4 |
JTR2008-4 | R0.4 | 1.6 | 4 | 50 | 4 |
JTR2008-6 | R0.4 | 1.6 | 6 | 50 | 4 |
JTR2008-8 | R0.4 | 1.6 | 8 | 50 | 4 |
JTR2008-10 | R0.4 | 1.6 | 10 | 50 | 4 |
JTR2010-4 | R0.5 | 2 | 4 | 50 | 4 |
JTR2010-6 | R0.5 | 2 | 6 | 50 | 4 |
JTR2010-8 | R0.5 | 2 | 8 | 50 | 4 |
JTR2010-10 | R0.5 | 2 | 10 | 50 | 4 |
JTR2010-12 | R0.5 | 2 | 12 | 50 | 4 |
JTR2015-6 | R0.75 | 3 | 6 | 50 | 4 |
JTR2015-8 | R0.75 | 3 | 8 | 50 | 4 |
JTR2015-10 | R0.75 | 3 | 10 | 50 | 4 |
JTR2015-12 | R0.75 | 3 | 12 | 50 | 4 |
JTR2020-6 | R1.0 | 4 | 6 | 50 | 4 |
JTR2020-8 | R1.0 | 4 | 8 | 50 | 4 |
JTR2020-10 | R1.0 | 4 | 10 | 50 | 4 |
JTR2020-12 | R1.0 | 4 | 12 | 50 | 4 |
JTR2020-16 | R1.0 | 4 | 16 | 50 | 4 |
JTR2030-10 | R1.5 | 6 | 10 | 50 | 4 |
JTR2030-12 | R1.5 | 6 | 12 | 50 | 4 |
JTR2030-16 | R1.5 | 6 | 16 | 50 | 4 |
JTR2030-20 | R1.5 | 6 | 20 | 50 | 4 |
JTR2040-12 | R2.0 | 8 | 12 | 50 | 4 |
JTR2040-16 | R2.0 | 8 | 16 | 50 | 4 |
JTR2040-20 | R2.0 | 8 | 20 | 50 | 4 |
JTR2040-25 | R2.0 | 8 | 25 | 50 | 4 |
- - - -
?
?
?Description
?
???1,?Co:?10-12%,?WC:?88-90%,
????????Grain?size:?0.2-0.6μm,
????????Hardness:?92.5-94.0?HRA,
????????T.R.S.:?4200-4800?N/mm2,
????????Density:?14.3-14.8?G/cm3
?
???2,?We?got?250T?Extruder,?10MPa?Overpressure?Sintering?Furnace-Vacuum
???????Dewaxing,?these?two?equipments?are?very?very?important?for?manufacture?and?high?quality?carbide?rods.
?
???3,?We?use?our?own?carbide?rod?for?90%?of?cutting?tools.?
?
???4, We have introduced advanced CNC grinding machines in operating,Rollomatic,Schneeberger from Switzerland, ANCA from Australia, Zoller from German,KEYENCE from Japan,set? up(Japan FANUC, brother processing center) tool laboratory?? test cut.Our technology from Taiwan.
Guarantee?high?precision?and?good?performance.
?
?? 5,?Helix?Angle:?38-42?°(we?could?do?4?of?them?are?37°)
? ? ? ? ?Diameter?of?cutting?edge: 1-20mm
?????????Diameter?of?rods:?4-20mm
?????????Length:?50-150mm
?????????Cutting?Form:?Ball?nose,?Corner?Radius,?Taper?Flute,?etc.
?????????Flutes?No.:?2-4???
???
?
Super?coating
?
?????TiSiN??TiAlN??AlTiN?or?TiCN?,
?????improve?tool?life,?reduce?the?coefficient?of?friction.
?
?
?Applications
?
????Copper,?Cast?Iron,?Carbon?steel,?Tool?steel,
????Mould?steel,?Die?steel,?Stainless?steel,?Plastic,?Arcylic,?etc.?
?
?
?Price?Performance?Ratio
?
?? From?tungsten?powder?to?end?mills,?that& acute;s?the?reason?of?our?competitiveness!
???Make?sure?about?each?piece?end?mill?has?a?good?quality,high?precision?and?good?performance.
???More?discount?will?be?offered?according?to?exact?quantity.
???Welcome?to?be?our?agents,?OEM?is?also?available.
?
?
?Products?display
?
?
Read More
Dongguan Diamond Hardware Factory
Square End Mill,Ball Nose End Mill,Corner Radius End Mill
Address: D2-53 JuHe plaza,Henan industrial park,JinSha village,Chang An town,Dongguan city,China,
Dongguan, Guangdong
China, 511700
Tel: 86-769-85470938
Fax: 86-769-85470938
