Welding & Solders

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Welding & Solders

Share us

360 Cast - Iron Multi Cyclone Dust Collector With Activated Carbon Layer

XTD

Send Inquiry

Description

Production Description

Multi cyclone Dust Collector is one of the typical industrial dust collector. The cyclones are listed in the scrubber body and equipped into a whole. It can be applied on all kinds of industry boilers and utility boilers: chain furnace, circulating fluidized bed furnace, pulverized coal furnace, hot-water stove, biomass boiler, CWS-boiler, steel sintering machine, hot-blast stove, reciprocating boiler, spreader stoker boiler, lime kiln, rotary kiln and other kinds of industrial boilers and utility boilers. It?adopts permutation and combination of single cyclone inside according to the volume flow of flue gas. Each single cyclone can treat flue gas amount about 750 m3/h and remove dust particles in the range of 5um to 10um, as a result, 290 ceramic multi cyclone dust collector is an ideal dust removal device. (Especially dealing with biomass furnace and coal furnace well or as a preliminary dust collection before bag filter dust collector and wet desulfurization dust collector)

?



?

Principle of Operation

The flue gas flows into the dust collector in certain speed, and rotates in the cyclone tube through the director. Under the action of centrifugal force, the particle and the gas are separated. The dust after separation falls down on the hopper of the dust collector, and exports from bottom discharge valve. The air after purification circulates internally and discharges from exhaust pipe.

?

Accessories



?

?

Types

- - - -
Types of Multi-cyclone Dust Collector |
Materials of the cyclones including: ceramic and cast-iron.
Cyclone Specification: φ480 ceramic cyclone(cc),φ360 ceramic cyclone,φ290 ceramic cyclone,φ220 ceramic cyclone,ceramic tangential cyclone and 707 cyclone(cast-iron cyclone)(can be supplied on order according to diameter of particle and efficiency of the dust collector) |
Spec. Dust Collector | Flue gas treatment/ea(m3/h) | Dust Diameter | Efficiency | Resistance(Pa) | Cyclone Material | Manufacture Craft of Cyclone | Tem Resistance |
480 | 3000 | ＞10um | 92% | 700 | Ceramic | Machine | ＜300℃ |
360 | 1500 | ＞10um | 80-90% | 700-900 | Ceramic | Manual/Machine | ＜300℃ |
290 | 750 | 5-10um | 85-92% | 900 | Ceramic | Manual/Machine | ＜300℃ |
220 | 500 | 3-10um | 85-95% | 1100 | Ceramic | Manual | ＜300℃ |
Tangential | 500 | 3-10um | 90-95% | 1100 | Ceramic | Manual | ＜300℃ |
707 Cast-iron | 500 | 3-10um | 90-95% | 1100 | Cast-iron | Die making | ＜300℃ |
High-tempurature resistance | Manufacture with different types of cyclones and treated with thermal insulation. | 300-650℃ |
Dry Desulfurization | Manufacture with different types of cyclones, and filled with activated carbon layer. It can absorb H2S in the flue gas. Desulphurization efficiency :70% ; Resistance:1100Pa.
? |
- - - -

?

Transportation

1 . Treatment flue gas : ≤300000m3/h . Multi-cyclone dust collector will be transported as a whole .

?



?

2 . Treatment flue gas : ＞300000m3/h . Multi-cyclone dust collector will manufacture separately and assemble at site in order to save production and transportation cost. Meanwhile standard production can control quality of the equipment , which is better than manufacturing the equipment at site.

?



?

?

Read More