Others

1. Home
2. Products
3. Electronic & Electrical
4. Others

Share us

900MHz / 1800MHz GPPS Tracker OBD for car remotely tracking and car engine diagnose

G-T001

Send Inquiry

Description

?

?

1:GPPS Tracker OBD overview

?

G-T001 is a smart GPS Tracker OBD terminal with the features of below: remote diagnosis, live vehicle tracking, voice monitoring, serious collision alert, vibration detection, low battery alert, high coolant temperature alert, geo-fence alert, engine fault alert, excessive speed alert, drowsy driving alert, live vehicle tracker, safety reminder, vehicle maintenance reminder, engine on/off notification, trip report, working conditions upload, and firmware update over-the-air. Rapid acceleration, abrupt deceleration, average speed, frequency of excessive speed, average speed of excessive speed, highest speed of excessive speed, frequency of drowsy driving, average duration of drowsy driving will be record by the terminal. Based on this data, it’s easy to analyze the driving behaviors.

?

Attention:only the car produced after year 2000 then can it be used on the car your owned.

Support protocol of engine

J1850 PWM

J1850 VPW

ISO-9141-2

ISO-14230 KWP2000

ISO-15765 CAN

?

2:Main Application Field

?

Insurance?Company
Taxi Rental Company

4S Group repair shop

Vehicle?Factory

Personal vehicle owner

Enterprise?Group?Fleet?Management
Government Vehicle?fleet Management

?

3:Specification

?

- - - -
Item | Parameter |
Dimensions | 51.3 x 46.0 x 24.3? (mm) |
Operating Temp | -25°~ +75° |
Power Consumption | 200mA (Data logging) 55mA?? (Sleep) |
OBDII Protocols Supported | J1850 PWM J1850 VPW ISO-9141-2 ISO-14230 KWP2000 ISO-15765 CAN |
GSM | EGSM900/1800MHZ GPRS? Cl. 10 |
Accelerometer | Axes??????????? x/y/z Range???????? -16g ~ +16g Sensitivity?????? 3.9 mg |
Antenna | Built-in Quad Band GSM Antenna Built-in GPS antenna Optional External GPS Antenna |
Status Indicators | GSM Indicator GSM Indicator OBD? Indicator |
- - - -


Main features

?

3.1Buzzer alarm

Excessive speed:If the speed is higher than the set value, the buzzer will sound alarm tone every three minutes.

Coolant temperature: if the coolant temperature is higher than the set value, the buzzer will sound alarm tone every three minutes.

Drowsy driving: if the duration of driving is higher than the set value, the buzzer will sound alarm tone every three minutes.

Serious engine fault: If a serious engine fault occurred, the buzzer will sound alarm tone every three minutes.

Normal engine fault: if a normal engine fault occurred, the buzzer will sound a BEEP tone.

3.2 Enable vibration detection

When engine was off and the OBD indicator was in On permanently status, call the terminal through the registered Phone number, the terminal will hang up the phone call and the vibration detection function will be enabled.

The terminal will enter into the vibration detection status when the OBD indicator was on for two minutes.

Once a vibration was detected, an alarm SMS will send to the registered phone number.

3.3 Disable vibration detection

After enabled the vibration detection function, call the terminal through the registered phone number, the terminal will hang up the call and disable the vibration detection function.

When engine was turned on, the vibration detection function will be disabled.

3.4 Voice monitoring

Call the service center through the registered phone number, after authorization, the voice monitoring will be enabled.

Call the terminal through the registered phone number, the terminal will answer the phone call and enter into the voice monitoring status.

Hang up phone call, the voice monitoring will be ended.

If you need monitor again, please call the service center.

3.5 Real time tracking

Call the service center through the registered phone number, after authorization, the real time tracking will be enabled.

Terminal will upload the location information to the service center periodically.

???? Inform the service center terminate the real time tracking service.

If you need track again, please call the service center.

3.6 Serious collision alarm

Once a serious collision was detected by the terminal, the terminal will send an alert message to the server with location information.

The service center will contact the registered phone number to verify the accident immediately.

Once the accident has been confirmed, the service center will contact the local rescue agent to carry out emergency rescue based on the location information.

3.7 Engine on and off notification

Call the service center to apply for this function via registered phone number.

If the feature was opened, once the engine status has changed, a notification SMS will send to registered phone number.

3.8 Maintenance reminder

Reminder based on the mileage interval.

If an engine fault was detected, a reminder will be sent.

If necessary, a reminder will be sent after the analysis of the runtime conditions by server.

3.9 Geo-fence

50 geo-fences can be set by server. When the car drives into or out the restricted area, an alarm will be trigged.?

3.10 Trip report

When the engine was turned off, a trip report will be uploaded to the server. Beginning time/end time/mileage/highest speed/highest RPM/times of abrupt deceleration & rapid acceleration/highest coolant temperature/duration of drowsy driving/duration of excessive speed etc. will be included in the report.

?

3.11 Battery monitoring

Monitoring the battery voltage level all the time, once the battery voltage goes below the preset value, a SMS reminder will be sent to the registered phone number.

?

?

4:Product configuration:

4.1: Standard configuration

?

- - - -
Picture | Name | quantity | application |
? | G-T001 | 1 | Main device |
? | USB Cable | 1 | Use this cable connect to PC set parameter |
- - - -

4.2 Optional configuration

- - - -
Picture | Name | quantity | application |
? | extended OBD cable1 | 1 | extended OBD cable1 |
? | extended OBD cable2 | 1 | extended OBD cable1 |
- - - -

?

5: Hardware Introduce



?

- - - -
Indicate light | color | implication |
GPS Locating Indicate light | Red | Off ... is sleep??? All is on...not located Flickering ... already located |
OBD Status Indicate light | Yellow | Off ... is sleep??? All is on ... not communicated with the car Flickering ... already associated with car |
GSM Status Indicate light | Blue | Slow flickering ... not associated with GSM internet Fast flickering ... already assocaited with the GSM internet Long flickering ... incoming a call ? |
- - - -

Factory Shows

?
Certificate


FAQ

Q:Why choose a GPS TRACKER OBD?

A:

GPS TRACKER OBD is a multi-function unit which not only can track the car but also can diagnose the problem of car remotely, so it would be a great help to your car and life

Q:

What is a GPS TRACKER OBD?

A:

GPS Tracker OBD is a terminal intergrated with GPS GSM and OBD 3 in 1 unit, has the function of GPS tracking ,car engine diagnose and driver behavior? analyze.

Q:Where to install the GPS TRACKER OBD?

A:Under the steering wheel there is a connector, just insert the GPS TRACKER OBD into it,then it would be OK.

Q:

? Who need this GPS Tracker OBD?

A:

If you are a car owner and your car is produced after year2000 then you need a GPS TRACKER OBD which can protect your car from theft and problem for you can track your car any time and read the car engine data remotely.

?

Read More