High Polymers

1. Home
2. Products
3. Chemicals
4. High Polymers

Share us

PCE Polycarboxylate Ether Superplasticizer

JSS-BM50%

Send Inquiry

Description

Product introduction
JSS-BM is a chloride-free,alkali-free and green environmentally friendly product.
It is a concentrated product,with high water-reducing rate, good slump retention ability and good adaptability. Moreover, it can improve the strength and durability of the concrete.
Product characteristic
1.High water reduction rate: The water reducing rate of concrete is above 35%;
2.The slump retention and water-reducing performance are balanced;
3.Good adhesion:Making concrete have excellent workability, non-layer,without segregation and bleeding;
4.Wide adaptability:It is compatible with ordinary silicate cement,silicate cement,slag silicate cement and all kinds of blending having excellent dispersibility and plasticity;
5.Good strength and durability: Low shrinkage rate,alkali and chloride-free can enhance concrete strength and durability;
6.Environmental friendly product;
7.Good stability: this product is good for long-term storage and without layer and sediment.
Scope of application
JSS-BM is especially suitable for high strength concrete for railway, traffic, bridge and electric power and so on. It is suitable for the preparation of high strength, high durability, self-compacting, steel fiber and self-leveling concrete.
Method of use & notes
1.JSS-BM is concentrated product and it is not suggested to be used directly.
2.The recommended dosage is 1.45%~2.2% after JSS-BM has been compounded.
3.As the construction requirements and raw materials are different, so,concrete mixing test should be made before using in order to insure concrete quality.
Package and storage
Package:IBC tank
Stored under 0-35 degree centigrade,far away from sunlight. Self-life is normally 12months.It must be tested before used when it is expired.

Read More