Assembly Line & Production Line
Description
Liquid Filter Bag Filter Element
?
?
Description
?
AccuSEP Filter Bag is designed for absolute filtration and its filtration efficiency is up to 99%. The filtration performance can rival the same class expensive filter cartridge, and the flowrate of single Size 2 bag is 7-10 times higher than the 40-inch-length pleated cartridge. It is also very easy to install and replace. The optimized gradient filter layer of AccuSEP delivers pre-filtering function and higher dirty holding capacity and saves filter media consumption.
AccuSEP Filter Bag is made of 100% FDA grade polypropylene without any silicone oil, adhesives or other releasing composition which may pollute the liquid. The gradient filter layers includes melt-blown polypropylene pre-filtering layer, multi-layer composite polypropylene filtration membranes, the external protection layer. AccuSEP is very good at filtering very small particles and even soft impurities such as colloforms and organics. The enough depth space can trap soft impurities in filtration fibers. On the contrary, soft impurities will paste onto the surface of conventional filter elements easily and reduce the filter element service life. And some impurities extrude through the filtration layer and cause filtration failure. The filter area of AccuSEP is 0.25m2 and 0.5m2 and optional filter media is PB.
?
LIVIC filter bag includes Depth Filtration Type and Mesh Surface Filtration Type
?
?
[Depth Filtration] Filtration layer consists of crossing fine fibers by kind of froming rules, is good at removing small solid particles and some soft impurites. It observably clarifies the liquid and is a kind of disposable filtration media. The depth space has stronger dirty holding capacity. It applies to liquid filtration of normal and low viscosity at high filtration ratings.
[Mesh Surface Filtration] Filter layer consists of smooth rigid mesh weaved by monofilament and the surface mesh is usually
square hole type. It is good to remove larger solid particles. Particle larger than mesh size will be blocked and particles smaller than mesh size pass easily. The mesh surface filtration has the screening function at set. The filter cake on the mesh surface is easy to strip and clean and the mesh filter media can be reused for several times after cleaning.
?
Specifications:
- - - -
Material | Polypropylene Needle Felt/Polyester Needle Felt/Nylon Monofilament Mesh/Polypropylene Multifilament/ Polyester Multifilament |
Filtration Rating | 1-1000μm |
Design Temperature | 0-145°C |
SIZE | 1#Filter Bag,Φ178mm,Length 419mm 2#Filter Bag,Φ178mm,Length 813mm 4#Filter Bag,Φ102mm,Length 355mm |
- - - -
?
Applications:
■ Applicable industries: Fine chemicals, water treatment systems, plup and paper, automobile manufacturing, petro-chemical, machining, coatings, electronics etc.
■ Applicable liquids: Wide applicability, all liquids contained micro-impurities.
?
Read More
Shanghai LIVIC Filtration System Co., Ltd.
Automatic Self Cleaning Filter,Self Cleaning Filter,Bernoulli Filter
Address: No.8, Hehua Rd., Pudong New District,
Shanghai, Shanghai
China, 200000
Tel: 86-21-68173577
Fax: 86-21-68173570
