Metallurgy Machinery
1050 Deep Drawn Cast Cookware Aluminum Circular Plate High Tensile Strength
1050 Deep Drawn
Description
? 1050 Deep Drawn Cast Cookware Aluminum Circular Plate High Tensile Strength?
?
?
Quick Detal:
?
1. Alloy: 1100, 1050, 1060, 3003
2. Temper: O, H12, H14
3. Thickness: 0.3mm ~ 10mm
4. Diameter: 20mm - 1300mm
5. Type: Disk, Round sheet, Circle,Disc
6. Min order: 500kgs each size
7. Payment TT or Irrevocable LC at sight
?
Description:
?
1. General Description
1100 1050 3003 5052 hot rolled cookware aluminum discs ,THICKNESS IS THE KEY TO QUALITY
Aluminum is the most common material for cookware, as it is an excellent conductor of heat and is inexpensive compared to copper or stainless steel. Although features such as the lid, handle and finish are important, thickness is the key element of quality. The thicker the pan, the better the heat dispersion, which reduces the chance of & quot;hot spots& quot; occurring. Remember, since an aluminum pan is all aluminum, heat spreads evenly over the total surface, including the side walls. Traditional stainless steel pans spread heat evenly only on the copper or aluminum base.
1100 1050 3003 5052 hot rolled cookware aluminum discs —THE GOOD AND THE BAD
When it comes to quality in plain aluminum pans, it is a story of the & quot;very good& quot; or & quot;very bad.& quot; Tour your favourite restaurant& acute;s kitchen and you will see primarily plain aluminum pans, especially huge stockpots. Why? Performance. Thick gauge pans needed for rugged commercial use are less expensive to manufacture in aluminum than stainless steel or copper. However, due to aluminum& acute;s low cost, it is also perfect for the & quot;very bad& quot; thin-gauge cookware. Most stores do not carry plain aluminum pans.
The is DC and CC quality for the cookware aluminium discs, but the DC quality is better . If you you DC quality can produce
perfect smooth cookingware,can use long time.
?
?
- - - -
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | --- | --- | 0.05 | 0.03 | 99.6 |
1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | --- | --- | 0.05 | 0.03 | 99.5 |
1100 | 0.95 | 0.05-0.2 | 0.05 | --- | --- | --- | 0.1 | --- | 99.0 |
1200 | 1.0 | 0.05 | 0.05 | --- | --- | --- | 0.1 | 0.05 | 99.0 |
3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | --- | --- | --- | 0.1 | --- | remainder |
- - - -
?
?
?
Specifications:
?
?
- - - -
Description | aluminum discs |
End Use | kitchen,cookingware,trafic signs, kettle,pot, pan,lamp cover, lighting relective cover |
Alloy | A1050,A1100,A1070,A1060,A3003,A5052 |
Temper | O(soft),H22,H14,H16,H18 |
Thickness | 0.2mm to 6.0mm |
Diameter | 100mm to 1200mm |
Packing | Export seaworthy packing |
Surface | Plain,Bright,No Marks |
Grade | DC and CC |
Tensile Strength | 60-135mpa |
Elongation | As demand |
- - - -
?
?
Applications:
?
Deep drawing cookware,
spinning cookware,
road sign,
Building Material,
Insulation,
and so on.
?
Competitive Advantage:
?
1. Factory direct sells, with competitive price.
2. Quick delivery time, according to the clinet& acute;s demand
3. Expert in producing cold rolled and hot rolled aluminium circles
4. Can supply small trial orders
5. Many years producing technology to supply high quality products
6. Quick reply on the customer& acute;s questions
?
?
Read More
HENAN HOBE METAL MATERIALS CO.,LTD.
Aluminium Discs Circles,Aluminum Sheet Circle,Aluminum Round Circle
Address: No. 521-15, 5th Floor, Shili Building, Hongzhuan Road,
Zhengzhou, Henan
China, 450000
Tel: 86-130-07527876
Fax: 86-371-85610107
