Cast & Forged

1. Home
2. Products
3. Minerals & Metallurgy
4. Cast & Forged

Share us

Cold Rolled 1000 Series Aluminium Discs Circles , 3003 3105 1060 1100 Aluminum Round Plate

Cold Rolled 1000

Send Inquiry

Description

? Cold Rolled 1000 Series Aluminium Discs Circles , 3003 3105 1060 1100 Aluminum Round Plate
?

?

Quick Detal:

?

Alloy: 1050, 1060, 1100, 1070, 3003, 5052...(DC and CC)
Temper: O, H12, H14, H18 and H24...
Thickness: 0.5mm-6.0mm
Diameter: 100mm-900mm
Minimum quantity: 1mt per specification.
Delivery time: 30 days or less.
Package: Standard exporting wooden case.

?

Description:

?

Commercially pure aluminum (1000-series aluminum, which is 99.9%+ pure) has the highest of thermal conductivity all aluminum alloys, but due to the “orange peel effect” where bonded pure aluminum can form bumps and ridges similar to orange peels due to the nature of its grain, it is not viable to use ONLY pure aluminum as the core of a cladded material (few customers would accept bumpy-looking cookware). Thus, typically you will see a construction like so: stainless steel, a very thin bonding layer of pure aluminum, a core of 3003 or 3004 aluminum, a very thin bonding layer of pure aluminum, and stainless steel. 3003/3004 aluminum has significantly lower thermal conductivity than pure aluminum, but you also avoid the orange peel effect.


If you are wondering why cookware manufacturers use 3003/3004 aluminum instead of some other aluminum alloys that have slightly higher thermal conductivity, it is because 3003/3004 aluminum is inexpensive, is easily formed (i.e., made into different shapes and sizes of cookware), has durability/strength good enough for kitchen cooking, and is more corrosion-resistant than many other aluminum alloys. That last factor is very important, since commercial and residential cookware is continually being banged into drawers/sinks/stovetops and being left with water, saltwater, and acids in them at all sorts of temperatures.

antity: 1mt per specification.
Delivery time: 30 days or less.
Package: Standard exporting wooden case.

?

As a main supplier of round aluminum sheet,aluminum round plate,aluminum round disc, we are manufactured from pure aluminum and are used in cookware and engineering, such as cooking wares, lighting purpose, cooker, frypan, pots, kettles, reflector of the light, etc...Deep drawing and hard anodizing quality Aluminum Circle Sheet can be supplied. Our Aluminum Circle is RoHS and REACH compliance and uses well-protected packing. Our circles are excellent material for producing cookware, utensil, pots, pans and kettles.

?

Hobe Aluminum is a professional aluminum manufacturer, mainly produces series-1, series-3, series-5, series-6 and series-8 pure aluminum and aluminum alloy plate/sheet/coil/strip/discs, etc, such as hot -rolled thick plate for molding, aluminum sheet for metal cap, round aluminum sheet,aluminum round plate,aluminum round disc for cookware, aluminum strip for transformers, aluminum tread/checkered plate, aluminum drilling entry for PCB, aluminum household foil, and so on. We have been exporting Aluminum Circle to US, UK, Italy, Germany, Netherlands, Bulgaria, Brazil, Chile, Thailand, Vietnam, Ghana, etc.

?

Packing of round aluminum sheet,aluminum round plate,aluminum round disc,?round aluminum sheet,aluminum round plate,aluminum round disc can be packed in export standard, covering with brown paper and plastic film. Finally the Aluminum Circle is fixed on wooden pallet/wooden case.

?

Application of round aluminum sheet,aluminum round plate,aluminum round disc.

?

?

ALLOY Min. Al Si Fe Cu Mn Mg Zn V Ti Other
1050 ? 99.5 0.25 0.4 0.05 0.05 0.05 0.05 0.05 0.03 0.03
1060 ? 99.6 0.25 0.35 0.05 0.03 0.03 0.05 0.05 0.03 0.03
1070 ? 99.7 0.25 0.25 0.04 0.03 0.03 0.04 0.05 0.03 0.03
1100 ? 99 0.95 0.95 0.05 0.2 0.05 0.1 / / 0.05
3003 ? 96.75 0.6 0.7 0.05 0.2 1.0 1.5 / 0.1 0.15

?


Mechanical Properties
TEMPER ? THICKNESS(mm) ?TENSILE STRENGTH ? ?ELONGATION% ? ? Standard
HO ? ? ? ? ? ? 0.35-10 ? ? ? ? ? ? ? ? ? ? ?60-100 ? ? ? ? ? ? ? ? ? ? ?≥ 20 ? ? ? ? ? ? ? ? ? ?GB/T91-2002
H12 ? ? ? ? ? ?0.5-10 ? ? ? ? ? ? ? ? ? ? ? ?70-120 ? ? ? ? ? ? ? ? ? ? ?≥ 4 ? ? ? ? ? ? ? ? ? ? ?GB/T91-2002
H14 ? ? ? ? ? ?0.5-10 ? ? ? ? ? ? ? ? ? ? ? ?85-120 ? ? ? ? ? ? ? ? ? ? ?≥ 2 ? ? ? ? ? ? ? ? ? ? ?GB/T91-2002

?

?

?

Specifications:

?

- - - -
Product | Aluminum Circle |
Alloy | 1050 1060 1100 1200 3003 |
Temper | O, H12, H14, H18 and H24... |
Thickness | 0.3mm-6.0mm |
Diameter | 50mm-1600mm, Commonly 200mm to 700mm |
Lead Time | Within 30-45 days after receiving deposit |
Packing | Standard Exporting wooden pallets or based on customer requirement |
Material | Using high-tech machinery utilizing premium grade Aluminum Coil. |
Surface: | Bright & smooth surface, free from defects like white rust, oil patch, edge damage. |
- - - -

?

Applications:

?

Deep drawing cookware,

spinning cookware,

road sign,

Building Material,

Insulation,

and so on.

?

Competitive Advantage:

?

Though smelting, casting, hot-rolling, cold-rolling, heat-treatment, finishing and other technology,the heavy melting aluminum and an appropriate quality of alloying elements is processed to light nonferrous metal material which has the characters of fine luster, good looking, light weight, poison less and selflessness, and it also has good properties of transmitting electric current and heat, processing and corrosion-resisting applicability.

?



?

Read More